Here’s How to Charge a Makita Cordless Drill

It’s too easy!

If you have a Makita cordless drill, your life gets much easier. Especially due to the lithium-ion batteries they come with. Makita drills are becoming popular with each passing day.

That said, a Makita battery charger is an important aspect of maintaining a cordless drill.

The first thing you must remember while operating a cordless tool is to never use it when the battery level is low. Always keep the battery charged and fresh.

Always use the charger supplied with your Makita cordless drill. Using any other charger will only damage your drill battery.

Another question, which must be bugging you would be, ‘how long do I charge the battery for?’ Well, remember that you simply have to follow the indicators on your makita battery charger.

If it is red, lt’s charged and if it’s green, it’s time to unplug it-Your ready to go!

Some of them have continuous light and flashing light indicators.

That said; remember the following tips while charging your cordless drill:

* Be sure that the Makita battery charger is plugged in and switched on.

* Fix the Makita battery into the charging station.

* Switch on the power supply and completely charge the battery.

* When it is first switched on check the battery charger indicator lights to ensure there are no errors. It should show either charging or already fully charged.

If you are charging the battery for the first time, charge it at least for 7-8 hours. If it has been previously charged, simply follow the charging indicators. A completely empty battery should be charged for around four to six hours. -Always go off the indicator lights though. Once charged, unplug the charging cord from the Makita cordless drill.

The device is now ready to be used.

Now, here are a few tips about maximizing the performance of your Makita battery.

A. You can prolong the battery life by completely charging and then fully discharging it, at least once a month. Exceptions to this rule are the Li-Ion batteries, which do not experience the memory effect.

B. Ensure that the contacts of your Makita cordless Drill Battery are as clean as possible as this would ensure a good charge.

C. Do not let the battery stay in a discharged state for long. Use the battery at least once a month.

D. If you don’t plan on using your tool for a month or so, take out the battery and store it in a cool and dry place. Also when not in use click the rotation direction switch by the trigger to neutral. This aids in battery storage.

So, do you still feel hassled about charging your cordless Makita cordless drill? We think not.

The 2 Minute Drill – Start the Interview With a Bang!

The 2-minute drill is an industry term for how you should answer the interviewer’s opening statement, “So, tell me a little bit about yourself.” In short, it is a synopsis statement of your skills, experience and accomplishments in the work environment.

Most people, in answering this question, often give a mundane answer describing who they are and what they like to do as well as providing personal information. The reason for this is because the candidate was not expecting the question, or the candidate simply did not anticipate the question. Anyone who has been on a few interviews is familiar with this opening statement by an interviewer.

So, why is this statement used so frequently by interviewers in opening an interview? The reason is fundamental to human nature and etiquette. Most interviewers want the candidate to feel comfortable and at ease and this is a benign way of doing so.

In actuality, the interviewer really doesn’t want to know about you as much as she or he wants to know if you are a valid candidate for the open position. The opening statement is nothing more than an icebreaker. However, you should capitalize on this and answer the real question as to your validity for the job.

Keep in mind that most people tasked with interviewing are not proficient in this exercise. They are usually managers in their field who are quite adept at management, but seldom trained in the fine art of interviewing. They usually know what they want in an employee, but don’t know how to ferret the right information out of the candidate. The 2- Minute Drill helps you to overcome this obstacle and pique the interviewer’s interest right out of the box.

The 2-Minute Drill is a rehearsed statement that must be delivered in an unrehearsed manner. The statement should flow as if it is just a casual response. However, the content must be packed with demonstrable achievements supported by measurable data. Two minutes can seem like an eternity, when you are giving evidence of your worth. That’s why this is not an easy task, but it’s worth all the effort to do it effectively.

Here’s a blueprint for The 2-Minute Drill:

  1. Itemize your skills, i.e. organization, communication, etc.
  2. Describe at least three accomplishments from your present job: a. What was the status before your accomplishment? b. What did you do to improve the status? c. What was the measurable result?
  3. Weave the information into a well-constructed, concise statement. For example

“The current methodology for storing and retrieving data was using an antiquated Excel application. This method would not accommodate projected growth needs and required a time-intensive system for error recognition and correction..”

After researching the alternative options in a database application and estimating the changeover costs, I was able to demonstrate to upper management that the database method would be cost-effective and breakeven would be realized in less than 18 months.

The new system was explored and a comprehensive study completed, which I headed up. The results included programming time and cost as well as an initiation schedule. The estimated savings in operating costs were over 21% and the availability for storage, access and retrieval is virtually limitless. Breakeven actually occurred three months earlier than projected.

The accomplishment described above takes less than 45 seconds to recite.

The sample accomplishment speaks volumes about this candidate. For instance, the candidate recognized a need beyond the normal scope of his/her job responsibilities and took action to avert a future catastrophe. This demonstrates job ownership by the candidate.

Not only did the candidate recognize a potential problem, he or she took the initiative to solve the problem in a professional manner offering a viable solution. The solution was adopted and the organization earned substantial savings in operating costs as well as significant room for future expansion.

The 2-Minute Drill requires much thought in its creation and presentation. Spend the time, it is well worth it.

Advantages of Using a Pneumatic Drill

A pneumatic drill, also known as an air drill, is a good choice for those who find themselves spending more time in the workshop than ever. It is the choice of professionals who do constant drilling work because of their efficiency and known lesser cost to operate and maintain.

Because an air drill is run only by compressed air, it has several advantages over an electrically-powered one.

Less weight

An air drill is lighter because it has fewer parts. The bulk of an electric drill’s weight comes from the DC motor which is heavy because it needs to produce high speeds and torque. Remove that in an air drill and all you have left is the casing, head, and the air tubes.

Increased productivity

Handling a lighter drill will lead to less fatigue. Because of such, long and constant drilling can be achieved and you can have more work done in a shorter span of time.

Less cost to operate

A pneumatic drill obviously does not use electricity. Although technically, electricity (or gas) is still needed to operate the compressor that runs the tool, it costs less because a compressor only uses bursts of energy-to fill the tank.

Less cost to maintain

Because it has fewer parts, there are lesser chances for things to break. An electric drill uses an electric motor which will at one point inevitably need servicing or rewinding. For an air drill, the only maintenance cost you need is regular oiling.

More ergonomic designs

Going back to its lighter weight and fewer moving parts, manufacturers now have more ways of designing a drill. They can make it slimmer and easier to handle, and they can make it smaller and use unconventional but more comfortable shapes-all of which adds to ease-of use.

A Consumer’s Guide to Buying a Cordless Drill

Since its inception, this versatile tool has seen many changes in design. These have resulted in one of the best power tools to carry in a toolbox. For portability and drilling holes easily, this device can’t be beat.

The origins of the electric drill date back to 1889, when inventor Arthur Janot made the first patent. He is universally credited with making this product. While the drill was not a new invention by any stretch, having one that used electric power made many tasks much more efficient. Surprisingly, the first cordless model was produced only six years later by Wilhelm Fein.

This tool can bore small or large holes in a variety of materials by two distinct motions: rotation and hammering of the drill bit into the material. Most users employ their drill for either driving screws or joining two piece of material together with screws. It is just a matter of changing the drill/bit.

The most popular type of drilling machine uses an on/off switch and a drill bit with a single speed. There are a full range of models currently being offered on the market. Most of the cordless drills are placed into one of two types: lightweight (for projects around the house) and heavy duty (for commercial usage).

Many different brands have become available in a wide variety of sizes and styles that are likely to fit almost any situation. Each manufacturer has put some of the most unique innovations into their models to improve the performance and versatility. One such item is a laser guide that can be used to see exactly where the hole will be drilled. There are also cordless chucks to make removing drill bits easier without the need for a key.

Typically a more expensive model will offer more features and is likely to also include the very latest technology. There are some considerations that need to be followed for anybody who is attempting to purchase one of these power tools for their own use.

The first is battery selection, as these items have come a long way from the initial offering and now come in one of two models: Ni-Cad or Lithium Ion. The former will typically cost less and usually come with the models intended for household use. Lithium Ion batteries are heavier and are a part of the commercial package. At least 2 batteries should come with the cordless drill kit since one can be used while the other is in the charging stand.

Another item that should be looked at is how comfortable the tool is when it is being used. This ergonomic styling can mean the difference between completing a job quickly or having to rest due to fatigue. All machines will also need some maintenance, but some of these are easier than others. The manufacturer should include some guidelines to this fact.

Cordless drills are become more popular due to their ease of use, increased efficiency and long run life. These things alone account for the increased sales among homeowners and building professionals.

2 Tips For Finding Cordless Drill Replacement Batteries

Often it can be extremely difficult to find cordless drill replacement batteries, especially if your cordless drill is an older model out of production.  It seems many stores do not carry older battery packs just to entice you to buy the latest new drill, well, lets not let that happen.  This article is here to help you find a battery pack.

When you get frustrated looking for a replacement battery and end up at a dead end, use these two tips to get back on track.

Have the model number for your drill.  This number should be located somewhere on your drill, and represents the serial number of the product.  You can use this number to help you find the appropriate battery as many online stores list replacement batteries with the number in the listing.

If using the drill’s model number doesn’t work then a better idea is to find the serial number on the battery pack.  Doing a search for this number almost always returns a good result.

These are just two tips on how you can better your search for cordless drill batteries.  Looking for one can be frustrating, but perhaps the most frustrating part is having to pay an arm and a leg for a new battery pack.  I guess when a seller knows you need it badly they think they can charge a hefty price for it.

It definitely isn’t fair to have to pay so much for a new one, but other than finding one somewhere for cheaper than other places you could always try to revive your battery.  There are a couple of how-to’s out there that show you exactly how to revive a battery back to life.  One video I saw used a welding tool to juice it back up.

Free Baseball Drills

Brushing up on Throwing and Catching

For many, the arrival of spring means one thing only: baseball season, with baseball fever often gripping those that play or coach the game. During the winter, baseball players tap their bats and oil their stiff, new gloves in anticipation of warm weather so they can hit the diamond to brush up on their skills.

Throwing and catching are by far the most universal skills in the game, since every position on the field must be able to do each so well they could practically do them in their sleep. This year, add some variety to your baseball practice by including some of the following free baseball drills that focus on improving your players’ throwing and catching abilities.

Go Long!

The first of the free baseball drills is for outfielders in particular. The Long Toss drill is an excellent way to lengthen players’ throwing distances and build players’ arm strength, especially those who throw with a pushing motion. To begin the drill, divide your team in partners standing facing each other approximately 30 feet apart. Where possible, partner together players with similar throwing distances.

Have the partner throw and catch to each other. When they successfully make 5 throws and catches each without missing a single one, have each player back up 5 feet, or the length of one giant stride. Continue until players are no longer able to make the throws smoothly.

The next of the free baseball drills rewards players with quick reflexes. The Quick Hands drill is set up similarly to the Long Toss drill mentioned above: with players partnered off and standing facing each other about 30 feet apart. The drill begins with a toot on the whistle and partners are to throw the ball back and forth between each other as fast as they possibly can.

As they make each catch, have the player yell out the number of catch it is. Whichever pair can throw the most catches in a 30 second period, which is marked by another blow on the whistle, is the winner. If either player misses a catch, their count returns to zero. As your team improves, have them begin standing further apart. This drill is great for encouraging a little healthy competition amongst your team.

Running Wild

Finally, we have the Base Throw drill, which teaches players accurate throwing and tagging procedures during a rundown at second base. To set up the drill, place a fielder at first and second base. Divide the remaining players into two groups, setting one group behind first base and the other behind second.

The drill begins with the sound of your whistle, and all players except the fielders begin running wildly between first and second base. During this drill, the fielders are to tag as many players as possible. As soon as a player is tagged, the must exit the field. The fielders are given one minute to tag as many players as possible. This drill forces your fielders to think on their feet and react quickly during a high-pressure situation.

The Importance of Fire Drills

Fire drills allow employees to practice exiting the workplace in the event of an emergency. A practiced exit plan will allow everyone to respond quickly, calmly, and safely in the event of a real emergency. Periodic drills may also be necessary as a part of your insurance coverage.

Fire Drill Objectives

The main objective of your fire drill should be to get everyone out efficiently and safely in the event of an emergency but, as a part of that, your objectives should include:

– Giving employees an opportunity to practice emergency procedures in a simulated environment

– Assessing whether employees can carry out assigned emergency duties

– Understanding whether the evacuation procedures were effective

– Considering any changes or adjustments to improve performance

– Complying with any fire code or insurance requirements

Frequency

How often you hold fire drills should be determined by your local fire code and your workplace fire hazards. If your workplace presents serious fire hazards (eg. flammable materials) or complex exit procedures (eg. a high-rise building), fire drills should be conducted more frequently. For these types of workplaces, fire drills scheduled every three months may be appropriate, whereas other workplaces may only need drills every six months.

Announced vs. Unannounced

Employees prefer announced drills so that they can plan for the event and minimize disruption to their work, but unannounced drills provide a more accurate representation of evacuation readiness. The type of drill may also depend on your purpose for the event. For example, an announced drill may be preferred if you are introducing a new evacuation procedure. If employees are learning a new procedure, a scheduled drill will enable them to learn more effectively. However, since emergency situations are never planned, you also want to use unannounced drills to see how people will react and to make sure everyone can exit efficiently and safely.

Evaluation

Your safety team should debrief after each fire drill to assess how it went and whether any changes to procedures or roles are needed. They should consider things such as:

– Did the fire alarm go off?

– Did all employees hear the alarm?

– Did all employees evacuate?

– Did employees shut down equipment before they evacuated?

– Did fire doors release?

– Did the designated employees carry out their safety duties?

– Did employees follow evacuation routes?

– Were evacuation routes clear?

– Did any employees need assistance?

– Did employees go to assembly areas after they exited?

– Was everyone accounted for?

Using these questions, you can identify the strengths and weaknesses of your evacuation plan and make improvements. These are a critical part of workplace safety and can help protect employees from not only fire but also other situations that require a quick exit from the workplace such as power outages.

What Size Drill Bit For Cabinet Knobs

If you’ve decided to refinish your kitchen then you’re probably sick of looking around for new hardware, what finish to put on the cabinet face etcetera. One thing you do need to know though is what size drill bit to use for cabinet knobs. The last thing you want to do with those new cabinet doors is to damage them. There are just a few tricks you need to do the job right without risking the cabinet finish.

First a brief primer on drawer handle pulls. Basically you have two types, knob and handle. They can attach in different methods.

A lot of handles will have two tiny screw holes built into the outer flange. These are the easiest to install.

For chunkier flush mount pulls and single knobs they attach with a bolt through the back of the cabinet and then are threaded into the hardware. You’ll have to be much more careful when drilling the holes for this.

The first step of any job is prep work. You’ll need a couple different sized drill bits, so picking up a drill index is a good idea. You won’t need a full-blown index you can accomplish everything you need with a selection off bits ranging from ¼ to ½ inch.

Make sure the bits are sharp. The last thing you want is to risk the bit walking across the cabinet surface or splintering the wood.

For the screw in type handle the installation is really simple. Just mark where the screws are going. Tap in a pilot hole about a third of the way through the cabinet face and sink in the screws.

The bolt in handles will take a bit more time and prep work.

A single bolt knob is the next step up in complexity. For this you’ll need to measure from the rim of the knob to the center of the bolt hole. This will be your drill offset.

Place a piece of tape over the cabinet face where you’ll be installing the knob. Now trace around the perimeter of the knob. Take your off set measurement to mark where the center of the bolt hole is.

Use the ¼ inch drill bit to zip in a pilot hole. Be sure to drill from front to back, I know it’s counter intuitive, but this way if you do have any splintering it will be on the inside of the cabinet.

Now just move up drill bit sizes until you get to a size just large enough to sink the bolt through the door.

Remove the tape, shoot home the bolt and tighten the knob to it.

The most complex door pull will have two bolts. The basic principal is the same.

Apply tape

Measure the offset

Trace the handle.

Mark the tape.

Drill the pilot hole then move up in size until you reach bolt size.

The only difference in attachment is you’ll be tightening the bolt from the back of the cabinet.

So what size drill bit to use for cabinet knobs is a bit of a misnomer. You’ll need quite a few different sizes to achieve a sleek professional look.

Drilling Out A File Cabinet Lock

File cabinets are typically used in office settings. They are used for storage of important and/or confidential files and documents. Aside from files and documents, filing cabinets are also generally used to store office supplies such as bond paper, pens, pencils, envelopes, folders, masking tape, staplers, staple wires, fasteners, and bunch of other stuff. As for personal use, filing cabinets usually hold expensive items, treasured collections, items that carry sentimental value, and of course important documents as well.

Filing cabinets usually come kitted out with a lock to prevent unauthorized people from accessing the items stored inside. But if you somehow lost the key to your filing cabinet, chaos can ensue, particularly in an office setting where important documents and supplies are always needed. In such cases, it is important to keep a clear head and be armed with a bit of handy know-how. Learn how to drill out the cabinet’s lock using the right tools. Here’s how to do it:

First gather all your tools. You will need a steel drill bit set, a drill, a bit of machine oil, and a flat-head screw driver. All of these items can be purchased at your local hardware store. You can also order them online via a trusted hardware and construction supply site.

Start by putting in the right sized steel drill bit into the chuck of your electrical drill. Choose a steel drill bit that could enter the longest part of the keyhole to ensure that it will break the lock tumblers apart. Make sure the drill bit is securely attached to the electric drill by using the chuck key to tighten it.

Pour a few drops of machine oil and smear it onto the drill bit to lessen the heat that is caused by the friction created by drilling the metal lock construction.

Start drilling the filing cabinet’s lock at a medium speed. Make sure you a have a firm grip on the electric drill and apply a steady pressure to it. Once you have fully bored into the metal lock construction, set your electric drill to reverse and pull it out carefully from the filing cabinet lock.

Next, get your flat-head screw driver and insert it into the slot of the metal lock construction. Turn the screwdriver clockwise. If you are successful in breaking the file cabinet lock apart, the release lever should trip and give out. If not, repeat the procedure from start to finish, progressing to the next biggest drill bit size if necessary. Once you are able to destroy the cabinet’s lock internally and cause the release lever to yield, you will finally have access to your files and/or office supplies.

All you need to do now is replace the filing cabinet’s lock. Change the lock as soon as possible to protect its contents. Filing cabinet locks are easy enough to find. You can purchase them at most hardware stores. When buying a new lock, bring the old, broken lock so you can compare sizes.

Corded Drills Vs Cordless Drills – The Pros and Cons

The debate regarding whether to go cord-less or stay with the cord when it comes to drills has been going on for years. For many people it’s their instinct to assume right off the bat that a cordless drill is superior to a corded because of the obvious convenience features it brings. This is a very fair argument but convenience is only one feature to consider when deciding what type of drill is best for you. We’ve outlined the pros and cons of each to help you see what works for you and what won’t.

Corded Drill Pros

• Corded can offer a lot more power than cordless

• You never have to worry about battery power or charging times

• You can work until you want to stop, not until your drill wants to stop

• More affordable on some levels than cordless

Corded Drill Cons

• Finding extension cords and outlets is not always an easy task

• It can be hard impossible to work outside if there is no electricity

• Storage is not quite as easy with a 10ft cord attached to the drill

Drills with a cord are far more suited towards someone who requires an enormous amount of power and will be using this drill for long durations of time. For example if you’re a professional contractor or even someone who undertakes large projects, the corded drills features may be more suited towards your needs.

Cordless Drill Pros

• Convenience; with no cord to carry around you can work anywhere

• They are often more compact and easier to manage size wise

• Storage is simple because there is no cord to accommodate for

Cordless Drill Cons

• Battery charging and duration of use can become a big problem for long jobs

• Usually more expensive than corded drills

• The added weight of the battery can be too much for some users

Drills that are cordless are perfect for small jobs around the house but may create a problem when you want to use them for long periods of time. Pay close attention to your battery and always try to have a spare already charged as a back-up power source.

Freelance Web Designer | WordPress Developer | Hong Kong