Hydroponic Systems At Home

There are six types of hydroponic systems that each addresses a different need of a potential grower. They are wick, water culture, ebb and flow and drip, NFT and Aeroponic. Every hydroponic system is a modification of one of these types of systems usually incorporating other aspects from the other techniques of a given system. While the needs of every plant are different and finding the right combination of this set of techniques is sometimes difficult it is key in finding the best methods for your growing goals.

In many instances people have a need for a growth apparatus in the home such as a hydroponic system; hydroponic growth systems incorporate water into the growth process. Seeds of the desired plant are placed in dirt and the dirt is placed into containers that are partially submerged in water that carries nutrients to the plants. These systems are usually very affordable and a great alternative to growing outside. In many cases there are adverse weather conditions such as rain or snow that can hamper or even outright prevent the growth of healthy plants. For those who wish to grow their own food this is an extremely unfortunate and unacceptable reality.

While many plants are resilient to the elements including bad weather other plants need to be housed inside where they can receive adequate conditions and nutrients. The temperature inside of a “grow room” often needs to be elevated in addition to a hydroponic system being in place. Something you do need to keep in mind about a hydroponic system is that the water being used to carry nutrients needs to be checked for Ph and other levels. When the water becomes dirty or requires more nutrients it must be changed in order to avoid any adverse effects with regard to the health of your plants.

Ph strips and other testing materials are necessary to keep handy while utilizing a hydroponic system, it is also a very good idea to keep your grow room sterile and free of any sort of contaminants. Once your plants begin to grow it is also important to keep an eye out for any insects that might eat the plant’s leaves or stems as they grow. There are many books available that can help to combat possible insect or microscopic contamination and often preventing such situations is much cheaper and easier than dealing with them after they come up. However it is not terribly expensive to combat an infestation, often insects can be defeated by introducing another insect such as a lady bug into environment to eat the insects that are eating your plants.

While it can have a bit of a learning curve utilizing a hydroponic system to grow your own food or other necessary plants can help a household to save money and live healthier. Most people would agree that this alone is worth the small investment in time and money that setting up a hydroponic systems involves. Remember to do your research and apply due diligence in order to get the most out of your investment.

Hydroponics 101 – Hydroponics Systems Explained

Hydroponics gardening is the method of growing plants without the use of soil. You can use this method of gardening to grow almost any plant, from flowers and herbs to edible vegetables and fruits. Many are seeing hydroponics as a viable method of mass producing edible vegetation in the near future, as precious resources such as water and minerals are growing scarce, and the population is continually growing. Its accessibility, scalability, and its cost benefits are seen as the greatest benefits.

There are many different types of hydroponics gardening. Ebb and flow, aeroponics, continuous-flow solution culture, and deep water culture are just a few of the systems in use today.

Ebb and flow, simply put, is just that- the ebb and flow of nutrients and nutrient rich water. Plants are placed in a tray filled with some sort of grow medium (such as Hydroton or clay granules). This tray is connected to a pump, which is physically below the tray. At regular intervals, the pump will fill the tray with the nutrient rich solution, and when the tray is submerged, the plants will have access to it. The pump then turns off, and the remaining nutrient solution is drained back into a reservoir. This happens at a continuous cycle. Except for the need to add some more nutrients and water after a period of time, the nutrients and the water is continually reused.

Aeroponics is the method of growing plants in an environment that is saturated with a water mist or aerosol of nutrient solution. The roots of the plants are suspended in the air, within a chamber.

In a continuous-flow solution culture, the roots of plants are continuously exposed to a shallow flow nutrient and water solution. The nutrient film technique, or NFT, is a popular variation. This is a great way to have high yields, as plants are constantly exposed to water, oxygen, and nutrients.

Deep water culture is a method of suspending roots in a nutrient-rich water solution. The plants are held in a netted pot, where the roots are exposed to the solution. Oxygen is provided by the use of an air pump and porous stones.

All of these methods can be used by a grower, and there are success stories with each one. The grower must constantly provide nutrients, clean water, and watch for pests and plant diseases. However, the yield achieved by using any hydroponics gardening method can be much more than traditional methods of gardening.

How to Grow Hydroponics – An Overview of Hydroponic Systems

Before starting out with soil-less cultivation an overview is needed on how to grow hydroponics. There are several systems that can be used for growing hydroponics. From simple homemade systems for hobby gardeners to complex, fully automated large-scale systems for commercial use. Before starting with hydroponic gardening it’s a good idea to look into the different ways on how to grow hydroponics.

  • Wick System: This is a very simple system where the nutrients are transfer to the grow medium by using a wick. An excellent system for small, fast growing crops such as salad and herbs. The drawback of this system is that the nutrients can be used faster than they are supplied (especially with large plants). For people who have no clue on how to grow hydroponics this is the ideal system to start with.
  • Floating Platform: Another very simple system. This one can be described as a water culture system because the roots are always surrounded by nutrient solution. A platform that holds the plants floats directly on the nutrient solution. Because of that a large number of plants can be grown in a small space, but doesn’t work well with large plants.
  • N.F.T. (Nutrient Film Technique): This is a common used system where a constant flow of nutrient solution feeds the plants. Nutrient solution is pumped into the growing tray, flows over the roots of the plants, and then drains back into the reservoir. No growing medium required but the roots will dry out if the pump stops working.
  • Ebb and Flow: Grow tray intermittently flooded with nutrient solution and afterwards drained back to the reservoir. An overflow controls the height to which the medium is flooded. How the timer of the pump is set depends on the size and type of plants. Can be used for a wide range of plants but the roots can dry out quickly when the watering cycles are interrupted

Hydroponics Gardening – Gardening Without Soil

Simply put, hydroponics gardening is “soil less” (without soil) gardening. The term was coined by UC Davis Professor Gerike in 1929. He took the Greek word for agriculture “geoponics” and came up with the term “hydroponics”. “Soil less” gardening experimentation had been around for some time; however, professor Gerike was the first to demonstrate that plants could be grown to full size without soil. The Hanging Gardens of Babylon and Floating Gardens of China are thought to be the first instances of “soil less” gardening in the history of man.

There are seven basic categories of hydroponics systems (methods): passive, water culture, flood and drain, drip, wick, nutrient film technique, and “aeroponic.”

The passive system is the simplest of the hydroponics systems. The roots of the plants are surrounded by a medium of some kind that has air holes like rockwool, perlite or gravel. The plant is then suspended so that it is immersed in the nutrient solution. The plant absorbs the nutrient through capillary action in the same manner as plants absorb nutrients through soil.

In the water culture system the plants are suspended over a tray of water fortified with the proper nutrients. The roots of the plants are immersed in the water solution. Air or oxygen is pumped into the solution allowing the roots to absorb the solution.

The flood and drain system sometimes called the ebb and flow system, has plants bound in a medium as in the passive system. The plants sit in a tray. The nutrient solution is pumped in around them, drains away and is pumped in again on a regular cycle.

Drip and wick systems are somewhat the same. The plants are bound in a medium and sit in a tray. In the drip system the nutrient system is continuously pumped into the medium with a dripping action. The wick system uses the capillary draw of a wick to bring the solution from a reservoir below.

The nutrient film technique (NFT) and the “aeroponic” method are the newest and most advanced hydroponics systems. The NFT system relies on a continuous flow of nutrient solution. In this system the tray is tipped and the solution runs off leaving only a thin film of the solution in the tray. Aeroponics on the other hand uses a system which sprays a fine mist of solution continuously into the air. Both NFT and aeroponics rely on the plants getting their nutrients out of the air.

Hydroponics is a method of growing plants without soil. Hydroponics systems fall into seven categories which are defined by the method used to apply nutrients to the plant’s root system. Plants that grow in soil spend half of their time growing up and the other half growing the root system to find nutrient. Soil less plants grow taller because their nutrients are readily available to the root system.

Hydroponics is the wave of the future. It is being studied in classrooms across the country and rapidly becoming a hobby. Get involved, hydroponics is fun and easy to do.

Copyright © Larry Gildea, All Rights Reserved.

This article may be distributed freely on your website and in your ezines, as long as this entire article, copyright notice, links and the resource box are unchanged.

The Numerous Advantages in Using Raft Aquaponics

Aquaponics is a new innovation in the art of planting especially in urban areas where soil for planting is scarce. In the aquaponics system, there is a symbiosis between the plants in the grow bed and the fishes in the aquarium or tank. There is no need for constant replacement of water for the fish and there is no need for soil in planting as well.

Grow beds are important for the survival of plants in the aquaponics system. In fact, there are three kinds of grow beds nowadays. First is the Nutrient Film Technique or the NFT however people do not usually use this since it requires higher maintenance in the system. Second is the media-filled beds and this is well-loved by many who are into aquaponics. Last but not the least is the raft system which is used in raft aquaponics. It has proved to be advantageous compared to other grow beds. Read on and find out why.

Great Yields

When you are truly serious in your aquaponics system and you want to earn, use the raft aquaponics. In the business world, the more sales is always better. Thus, these businessmen prefer the raft beds in the aquaponics system. After all, everybody wants higher sales and profit.

Healthier Fishes

Of course when there is maintenance in the aquaponics system, it is expected that it will be working well and everything is balanced. However, the raft aquaponics showed that fishes are healthier in this system. This is probably due to the fact that this kind of system necessitates more water compared to ordinary aquaponics system. Better water flow means healthier fishes.

Increased Stock Densities

As mentioned, raft aquaponics demands more gallons of water. Nevertheless, it also gives a number of positive results. Because of it, the system can give bigger stock densities and this is well-known in the market. The constant flow of water from one channel to the other mainly contributes to this result. As observed by many people who denote aquaponics as their hobby, this system will need at least five to eight times more water than the usual system. However, this may not become a big deal knowing that the effects are affirmative.

Smaller Number of Fishes Required

Due to the greater volume of water in the aquaponics system, the number of fishes required is not big enough just to make a balance in the aquaponics system. The owners will surely save a lot for buying fishes for the system. This is very helpful because tilapia is somehow expensive. This is surely a great advantage.

Easy Water Management

A smaller fish population due to the greater water volume makes water management easy. This is a good help even if you have a filtration system. Surely, it is a very important part of the raft aquaponics since it maintains clear and clean water for the system. Moreover, it is also advantageous since overall cleaning of the system that is conducted oftentimes is discouraged.

Depending on your needs, you can choose among the grow beds. But only the raft system can give such advantages.

Aquaponics System for Beginners

Aquaponics is a sustainable food production system that everyone can try. It can both serve as a hobby, and later on be a business that will surely generate money. Before dwelling on further details, what is really the definition of Aquaponics? Is it something that is too complex to learn by average person? The answer is definitely, YES.

It is defined as a system that combines aquaculture (refers to raising of aquatic animals, – fish, prawns, crayfish inside aquariums or tanks), and Hydroponics (pertains to cultivating plants in water). Overall, if you combine these 2 words, you get an idea of plants and aquatic animals living in a symbiotic relationship, or in a re-circulating system, the effluents of one area, will be beneficial for the other and vice versa.

So, how can you make your own Aquaponics System? One thing that you must understand here, is that most of its components are man-made. Therefore it greatly depends on the design, construction, and maintenance of people. First, let us go through the 3 main styles of Aquaponics System. Media filled beds aside from being the simplest ones, has the nature of using containers filled with expanded clay which tends to absorb water from the fish tanks. The second style, is NFT, or Nutrient Film Technique. In this setup, nutrient filled water is pumped in tubes going into plant gutters, which then flow to the plants themselves.

The main limitation of this style is that it is only intended for green and leafy vegetables and not for large plants having big and elongated roots. Lastly, we have DWC or Deep Water Culture. From the word itself, it involves growing plants above water, ensuring that their roots are hanging downside in the water itself. DWC is one of the most commonly used for commercial purposes because of its practicality and effectiveness. Upon looking into all of these types, which is the best Aquaponics System for beginners? For simplicity, media-filled beds are proven to work. They also require average to low maintenance, so no worries on your end. Slowly, as you gain years of experience, you can also try exploring the other styles, and later find out which one suits your interest, need, and capacity.

As for the components needed, you basically must have fish tanks, containers, or even aquarium, plant beds where you can place your chosen plants neatly, water system, solids tanks (where extra food, or extra wastes are being placed), and biofilter. Most of these items can be bought in the local hardware, and the other parts such as plant beds can actually be created by you! Yes- most of the practitioners in this field, just use scrap wood, or plastic, then they try to construct their own. In this way you can apply your creative juices to come up with your own stylish and useful aquaponics system. As you progress in this field, you will also learn how to choose the right fish and plants, and which combinations produce the most desirable effect. In the end it is all about hard work, patience and enthusiasm.

Gardening – Understanding Hydroponics

Hydroponics The Science

Understanding the science that is necessary in hydroponics is a must to become a great hydroponics farmer, whether that be a hobby of indoor gardening or its to be your livelihood as a major horticulturist. The science required to understand hydroponics involves the systems in use, the methods of which these systems allow the user, the air required both in and out, the plants cycles from birth to finish, the lighting your crop will require to flourish to its maximum and finally the feed.

Hydroponics Systems

Today we are given a large choice of which hydroponics system we want to employ in our growing environment and many offer the user a choice of which method to employ. This will firstly determine the end result as some systems offer greater taste over others, faster growth but less impressive yielding and vise versa, or even shorter cycles to bring your crops in faster. Working out which is best suited to your environment and requirements is a must as the purchase of the hydroponics system is deemed the most important decision.

Hydroponics Growing Method

Before purchasing your system decide upon which growing method you are to employ, some systems decide this for you however today we are given a choice with many systems. Many will use NFT, (nutrient film technique) as this is what all growers result to using after time due its low use of media’s and high yielding abilities. NFT requires more attention than that of other methods at first but will reward you greater for this time. With experience, as with all methods the science soon becomes second nature. Further growing methods such as Ebb & Flow, Flood & Drain, Drip & Drain, Dripper, Pot Culture and Aeroponics also bear high yields with each having their own benefit greater than others such as Aeroponics systems are better for growth due to the rootzone having a higher oxygen content present.

Oxygen Air In & Air Out

If your air source is poor your plants will suffer. Plants like ourselves require a high C02 content, this is supplied to the grow room using natural air from outdoors and / or cannistered C02. The first being the choice of many and the simpliest to employ. Fans and carbon filters carry this air along flexible ducting from outside and ejects into the grow room or grow tent. To remove the stale air, again fans, carbon filters and ducting are used. It is common practice to use a size larger fan and filter for the air exhausting from the room than that of bringing the air in. This is to ensure all odours / odors are not present in the grow room, resulting in good quality present for the plants to inhale. The use of carbon filters is to remove any odours / odors resulting in a cleaner air supply, bug free. C02 requires more time and effort along with the equipment required to release the C02 at timed intervals. Failure to get this correct will affect the plants well being and more so the end result, the yield. Further more, offering C02 to your plants at an early stage, such as before heavy rooting in the system or pot has taken hold, your plants will die for sure. Exhausting air using this method is more complicated resulting in the fans and filters being operational at timed intervals resulting in a higher odour / odor content in the growing environment.

Plants Life Cycle

All plants life cycles differ. Research the plants you are intending to grow is necessary to understand at which critical timings to supply which elements and minerals. From day one either as a seedling or a clone your plant requires help to flourish into a high yielding success. There are many stages you will need to highlight from mass rooting, growth phsycological times, flower introduction, flower enhancement, ripening and finalizing its life time. The control of growth or flower is simple with the grower managing the light being given to the plants. A 15 to 18 hour light period will signal to the plants they are to grow, shortening of this time to 10 to 12 hours will signal to switch to flowering mode. Failure to give your plants what they require at their critical times will result in your plant becoming confused, this can result in seeds becoming visible on / in the fruits or flowers.

Grow Lights Horticulture Lighting

Grow Lights or horticulture lighting firstly determines the growth or flowering stage of your plants life however grow lights play a much larger part. Firstly I need to stress that plants only need a light signal for them to grow or flower, however poor light, or low strength grow lights will not produce greatly either in flowers or growth. Grow Lights emit lumens to your plants, the stronger these lumens the greater the result. However supplying lumens too strong at too soon a stage can be detrimental to the plants health resulting in stunning the plants growth. This is easily controlled by the highering and lowering of your grow lights above the plants heads. Further more, plants require different spectrums of light to enhance either their growth or flowering stage, these are managed by purpose made lamps for growth and flowering. In growth Metal Halide (M/H) are used and changed in flowering to High Pressure Sodium (HPS). LED lights are currently being introduced due to the ability the user has to supply the correct spectrum of colour, these do not produce lumens however the colour’s emitted enhance the cycles. LED as of yet do not produce yields as great as HPS lamps do when fruiting and flowering. Be sure to use the correct strength lamp to produce the best yield possible. If your plants are growing too slowly its possible your lights are not strong enough for the job in hand. As with the more plants present in your grow room the more lighting required. You can not expect plants grown in poor lighting to produce well in flowering / fruiting.

Feeds Minerals, Nutrients, Additives, Fertilisers, Growth Media’s

The correct feeds are essential at critical timings, as explained in a plants life cycle with different stages require different elements and minerals. The minerals are supplied using liquid feeds and growth media’s / medium’s. Growth media is the choice of substrate the plants root mass will grow. All methods require media’s with exception to NFT however some growers will use media’s such as rockwool cubes and plugs in NFT to house the plants stem and first roots. This is not required with NFT as you can propagate clones using rubber discs to hold the stem. More often today clay pebbles are the choice of many due to the ease of use and reducing mess that occurs with fertilisers, soils and soils substitutes such as CoCo or Terra. Clay pebbles retain the liquid feed and oxygen and release these slowly into the roots. A good quality of oxygen is retained in the rootzone resulting in better growth and an all round healthier plant. Liquid feeds containing the minerals required are available widely and each with an additive to suit the critical timings such as root protection feeds which protect and enhance the rootmass, enzymes encourage growth further and flower enhancers mimic flowering genes to force the plant to produce larger flowers. Whilst ripening additives are used to clean the substrate of unwanted minerals and nutrients they also signal to the plant to end its cycle forcing it to ripen its fruits and flowers. Ripening additives are also used if a problem has occurred with your crop that can not be rectified and to save what has been produced it can be ripened to harvest earlier than you would of.

Techniques in Hydroponics Culture – What is Best?

Hydroponics culture has been used widely and has been proven to make agriculture more efficient and effective, at lower overhead costs and high quality standard of produce.

Hydroponics mainly has two different methods of culture. These are the solution and the medium culture. Solution culture uses nutrient solution on its procedure. The three types of solution culture are static solution culture, continuous flow solution culture and aeroponics. Medium culture on the other hand, uses solid media in its culture. It can be gravel, soil and sand. Two main variations for each medium, sub irrigation and top irrigation.

Static solution culture. In static culture, plants are grown using containers. It may be of glass, plastic containers, tubings or tanks. Condition for culture is monitored such as the solution of the nutrient been applied to the plants. In this solution, culture may be aerated or not. In unaerated condition, the nutrient solution is kept low enough so that the roots can be exposed to the air, to supply its oxygen needs. However, aeration can also be provided through the use of aquarium pump, airline tubing and valves. When the nutrient solution has been depleted to a low level, fresh water may be added. An example of culture that uses such procedure is on garden hydroponics, this may be due to its space minimum requirement.

Continuous flow solution culture. Continuous flow solution culture has the nutrient solution flowing past the roots. This is done on large container, where solution may be kept concentrated and potentially serves thousands of plants. A popular variation of this is the NFT. NFT is Nutrient Film Technique where solution is kept at a film level to enable roots exposed for aeration and the nutrient is circulated through watertight gully called channels. The advantage of using Nutrient Film Technique over other solution culture is that it gives the plant adequate supply of oxygen, nutrient and water, where in some techniques, irregularity may occur. However, a downside of this technique may be on power outages and water clogging.

The key to effective Nutrient Film Technique is having the right slope pattern for the culture. Practically the ratio for this design is practiced at slopes of 1:30 to 1:40. Higher yields of high quality produce are obtained over an extended period of cropping.

Aeroponics. Aeroponics, as defined by wikipedia, is a system where roots are continuously or discontinuously in an environment saturated with fine drops (a mist or aerosol) of nutrient solution. This entails the plants to be suspended in the air. The key for this technique is proper aeration. Aeroponics is widely used in studies of plant physiology in laboratories.

Medium Culture. Medium culture as pre-defined in the above statement is the hydroponics culture with the use of gravel, sand or any solid media.

Subirrigation and top irrigation. Sub-irrigation or passive hydroponics is “a method where plants are grown in inert porous medium that transports water and fertilizer to the roots by capillary action from a separate reservoir as necessary, reducing labor and providing a constant supply of water to the roots,” wikipedia. A simple technique of this is the container is placed over a solution of nutrients or capillary mat.

Top irrigation is a method where the nutrient solution is periodically applied to the plants. This is usually done manually but may be automated through the use of water pump.

The use of technique for hydroponics system may vary depending on the produce and the space available to apply it. What is advantageous, mostly, the techniques are versatile and can be adapted to any environment.

How Is The Raft System in Commercial Aquaponics?

In commercial aquaponics, the most common grow bed is the raft system. There are two more grow bed designs, the NFT or Nutrient Film Technique and the media-filled grow bed. Even though media-filled beds are not so common in large production scales, it is the favorite of most aquaponics hobbyists. NFT on the other hand is the least preferred of the three designs because it requires more maintenance.

The raft system is highly advisable in commercial aquaponics because of the large production it yields. Media-filled beds don’t get to produce as much. Raft system allows for higher stocking densities and in businesses, the more sales the better. Initially, the raft system requires more water to complete but the water flow benefits the health of the fish.

The raft system allows for a higher stocking density of fish because of the water that is constantly flowing through the channels. This requires five to eight times more water than the normal. Because of the high volume of water, this makes the number of fish per gallon of water lower and therefore makes managing of the water easier.

In this design, the plants are placed on rafts made of Styrofoam. Only the roots of the plants are in constant contact with water. These rafts are arranged in a way that forms channels underneath to allow the water to pass through each root but before the water goes to the plants, it is first filtered to remove large particles so as not to cause clogging in the drainage. After flowing through plants’ roots, the water drains back into the fish tank and cycle goes on.

Solids capture – is a very important process in raft systems. If these solids are not removed from the system, over time they will build up in pipes and drainage and might even change the water level into something toxic for your plants and fish. It can also cause solids to coat the roots of the plants and will affect their ability to absorb nutrients.

Filtration system – is another important component in a raft aquaponics. The filter will help maintain a clean water for your system so that you won’t have to do a complete cleaning which is actually discouraged because it prevents bacteria to grow and multiply.

Sump tank – this is optional in a raft system but is used by many. A sump tank is located lower than all the other tanks in aquaponics. The water from the grow beds drain into the sump tank and when it reaches a certain level, the water is pumped back into the fish tank. The sump allows oxygenation of water numerous times each day.

Degassing and pH adjustment tanks – These two tanks are optional but help in the maintenance of the water levels. The degassing tank is where the water is made to release gas before going back into the system. The pH level adjustment tank is usually but not necessarily a separate tank where the water is slowly added base or acid to get the right pH level.

Find the Hydroponics System That Works For You

Grow all year long strawberries and not get worried about it getting out of the market. Plant your own at the haven of your home with hydroponics system. Planting has become fully accessible to many with the technological advancement that brought about by hydroponics system. With this, the technology not only offers convenience to the common households as a hobby but also to promises profit for commercial firms engaged in food production.

Hydroponics far and wide has become one of the reasons why seasons are not reasons to make the produce unavailable to the market. Hydroponics system enable plants to grow, and bear fruits even it is not the precise time of the year. If you are getting thrilled with the benefits that you can get with hydroponics system, you can get excited more if you will know how it works.

Hydroponics system can be done indoors without the barrier or limitations of having less area to do the planting. Fundamentally speaking, there are six basic kinds of hydroponics system. The kinds depends on its applicability to the planting situation you are in. these can be named as the wick, the ebb and flow, the drip, water culture, aeroponic and the NFT or the Nutrient Film Technique.

The wick hydroponic system is the simplest among the types as this have minimum planting media requirements. Considered as a passive system, the nutrient solution is sourced out from a reservoir through a wick. Among the popular options for medium are Coconut Fiber and Pro-mix.

The drain system or the ebb and flow functions by flooding the tray medium with nutrient solution and then have it drained and returned to the reservoir. This is made through a submerged pump interconnected with a timer.

If you are looking for a less complicated hydroponics system, the drip system may be the one that you are looking for. This is the commonly used system throughout the globe. Like the ebb and flow system, this functions with a timer and a submersed pump. With the automation activated by the timer, the nutrient solution is dripped into the based of the plants. Excess solutions are collected by the Recovery.

Water culture. A platform is used to hold the plants in the water culture. Oftentimes, Styrofoams and other floats serves as the medium for the plants to directly float into the nutrient solution. To supply the air, an air pump is further utilized.

Aeroponics. The latest technology in hydroponics system, aeroponic is facilitated by misting the roots consistently over some minutes. The roots are allowed to dangle in the air.

NFT. The Nutrient Film Technique has no timer for the submersible pump. The operation involves pumping the nutrient solution into a tube, allowing it to flow over the roots of the plants, while letting the excess drains back to the water reservoir. The medium used for growing is the air and is only supported by a basket.

Now there we have it. After being able to learn a few types of hydroponics system, you should be able to learn how it works and recognized which may be applicable for your needs.

Freelance Web Designer | WordPress Developer | Hong Kong