Rogue Wolf

Oldenglen is a special place near Jax’s home in southern Oregon. Having his life uprooted from life in England was difficult for him. However, school wasn’t his salvation, but the magical relationship he discovered with this unique forest and the creatures who live within as well as the trust and friendship with each other.

Keeping the area protected is always a constant challenge. With the ever-expanding new housing developments for humans threatening the natural habitats of the wild creatures while keeping the balance of nature between the expanding population of people and nature.

Balances within Oldenglen are also difficult to maintain. Providing food for all creatures requires just the correct proportion between predators and prey. Too many prey demands massive amounts of plants and small creatures, while predators must depend on an abundance of prey, otherwise they starve.

Oldenglen now is facing two challenges.

The first involves some new visitors, eleven wolves. The problem is that this area of the glen cannot possibly feed that many without decimating the population of the prey animals. How does anyone convince the wolves to leave the area? How many creatures will be food for this pack?With their needs for food, the local ranchers raising sheep and cows are fearful for the survival of their herds. They see the only solution is to have the wolves killed.

Another problem bothering Jax and Sarah is the existence of two nearby poachers who are renting from Sarah’s grandfather. Can they possibly save the young eagle that was captured?

Rogue Wolf is the third book in this projected five book series. This Oldenglen series should be read in order. Minimally, all readers need to read the first book, Oldenglen to understand the characters and their relationships and history individually and with each other.

Oldenglen, the first book in the series has been the recipient of many awards including a Silver Medal at the 2016 IBPA Benjamin Franklin Awards for The Bill Fisher Award for the Best First Book: Children’s Young Adult, and Second Place in the Reader Views Literary Awards 2015/2016 for ages 12-16.

Book Two, Lone Wolf also won numerous awards. It was a Red Ribbon Winner in The Wishing Shelf Book, a finalist in the 2016 Foreward Indies for Juvenile Fiction, a Silver Medalist in the 2017 IBPA Benjamin Franklin Awards for Young Readers, and an Honorable Mention in the Readers Views Literary Awards 2016/2017.

In all these books, including this one, all the characters are believable and realistic including the animals which stay true to the creature and have personalities while magically communicating with Jax.

With the theme of balance, friendship, and anti-bullying, the pace is quick with the reader wanting more with their cliff-hanging chapter ends and the book truly expressing the harmony of nature.

Even the cover is beautifully illustrated by artist, Chris Beatrice.

The Oldenglen series was begun by author Robin Mason and his father, Michael Mason. Robin completed books two and three completely by himself. Robin was born in England but spent considerable time in his childhood exploring an estate in British Columbia while his father read to him numerous books including The Chronicles of Narnia, The Hobbit, The Wind in the Willows, The Hobbit, and The Lord of The Rings trilogy.

This book is recommended for children from ages eight to twelve. Personally, I would find this book challenging for an eight-year old to read independently and believe this age level would thoroughly enjoy it as a read-aloud.

I also recommend this book be extended to readers through high school. In actuality readers of all ages, adult and children would completely enjoy Rogue Wolf.

Access Queries: Date Criteria May Not Always Work With MS Access Query

Learning about ms access query is the key to a good database management system as it is the heart of any database application.

There are many ways and questions to ask a database using queries and mastering the special conventions and criteria will pay dividend and avoid silly mistakes, illogical record set results and even errors.

One of the more commonly used criteria and prone to errors (if misunderstood) is the date/time data type and it’s conventions.

Take a look at the ms access query below showing orders before the year 2016 and the design of the

query which suggested a date range from 1st January 2016 to 31st December 2016.

The criteria for the above shows >=#01/01/2016 < #31/12/2016# which will not actually return the correct range and instead show what's known as logical errors (dates outside the range).
It’s missing the ‘And’ operator and better still adding the ‘Between’ operator will capture the correct range too. The # (hash sign) is the correct convention and good check to ensure it’s the right data type too (date/time in this case).

A revised example is shown below:

If the field is a genuine date/time data type, you do not need to enter the # (hash sign) as it will automatically fill this in for you when moving the cursor elsewhere in the gird (another convention checker for you).

If however you see double-quotes (” “) wrapped around the date expression, this suggests either you chosen the wrong field or the date field is actually a text data type and it will simply not work as expected.

One final point to consider and even check for you ms access query database and those queries is the regional setting of the operating system you are using. UK versus USA setting often throw up confusion and inaccuracies to so ensure you are using the correct date/time formats.

MS Access queries are very powerful indeed and there are many permutations available.

A macro is a tool that lets you automate tasks and integrate functionality into your forms, reports, and controls. For instance, if you incorporate a command button to a form, you link the button’s OnClick event to a macro. The macro will have the commands that you want the button to perform every time it is ticked.

In Access, it is useful to consider macros as a simplified programming language that you compose by building a list of actions to perform. When you create a macro, you choose every action from a drop-down list then fill in the needed information for every action. Macros allow you to add functionality to forms, reports, and controls without writing code in a Visual Basic for Applications (VBA) module. Macros give a subset of the commands that are accessible in VBA, and most people find it simpler to construct a macro than to write VBA code.

For instance, assume that you need to begin a report right from one of your data entry forms. You can add a button to your form then make a macro that starts the report. You can either have a standalone macro, which is then bound to the OnClick event of the button, or embed the macro directly into the OnClick event of the button itself. In any case, when you tap the button, the macro runs and starts the report.

You create a macro by using the Macro Builder as shown in the illustration below.

On the Create tab, in the Macro & Code group, click Macro.

Understand Macros

The term macro is frequently used to denote independent macro objects. A macro object can contain several macros- referred to as a macro group. A macro group is shown in the Navigation Pane as a single macro object though it contains multiple macros. Unquestionably, it is possible to make each macro in a separate macro object, but it bodes well to gather some related macros into a single macro object. The name in the Macro Name column distinguishes every macro.

A macro comprises individual macro actions. Most actions involve one or more arguments. Moreover, you can assign names to every macro in a macro group. You can also add conditions to control how each action is run. The succeeding sections will explain every feature in detail.

Macro names

If your macro object contains just a single macro, macro names are needless. You can simply refer to the macro by the name of the macro object. But in the case of a macro group, you need to give a unique name to every macro.

Arguments

An argument is a value that gives information to the action, for example, what string to show in a message box, which control to operate on, and so on. Some arguments are compulsory while others are discretionary.

When you choose the data macro that you wish to run in the macro designer, Access database identifies if the data requires parameters. If it does, it displays text boxes where you can type in the arguments.

Conditions

A condition determines specific criteria that must be met before an action will be run. You can use any expression that evaluates to True/False or Yes/No. The action will not be performed if the expression evaluates to False, No, or 0 (zero). If the expression evaluates to some other value, the action will be executed.

One condition can control two or more actions. You can achieve this by writing an ellipsis in the Condition column for each succeeding action that you need the condition to apply to. If the expression evaluates to False, No, or 0 (zero), none of the actions are executed. If the condition evaluates to some other value, all actions are run.

In Access database 2010, the Macro Designer layout looks a lot like a text editor. The three columns are replaced with actions and conditional statements presented in a familiar top-down format that is used by programmers.

To make Access database temporarily skip an action, input False as a condition. Temporarily skipping an action can be helpful when you are troubleshooting a macro.

MS access is a great database tool and has great built-in functions to help you create a database, explore more.

About Author: It is the leading website is about learning to build an Access database using the most effective techniques.In this Articles it talks about Microsoft access.To know more visit at https://www.accessdatabasetutorial.com/

Tax Changes for 2017

TAX REFORM 2017

Let’s look at some of the tax changes for 2017. The changes will affect many taxpayers, some changes will make you happy and others you are not going to like. Originally, there was some buzz about going from seven tax brackets to five. The new tax brackets are better than the previous brackets in my opinion. Our tax brackets for 2017 starts with 10% the income range is the same as 2016 for all filing status. The 15% tax bracket was replaced with 12% tax bracket the income range is the same as 2016 for the 15% bracket. Our next bracket and last one included in this article is 22% down from 25% in 2016. The difference starts in MFS (Married Filing Separately) the income ranges from $38,701 to $82,500 which is different from 2016 which was up to $78,075.

The Standard Deduction increased for next tax season. I would be happy except the exemption credit was phased out due to the increase in the standard deduction. This is where families will see the difference in their refunds. In prior years the exemption credit increased by $50 every year. In 2016 the exemption credit was $4,050 per person on your return. Example: A family with husband, wife and four children would receive an exemption credit of $24,300 plus standard deduction of $9,350.

The new standard deduction for HOH will be $18,000 up from $9,350 almost a double increase. Will lose the $4,050 exemption credit.

Child and Dependent credit increased to $2,000 per child under 17, taxpayers will not receive the whole $2,000 as a refund. The refund portion will be up to $1,400 per qualifying child and nonrefundable dependent credit of $500 for non-qualifying children.

Moving Expense Deductions will not be allowed on tax returns for the 2017 tax year. Alimony is no longer deductible by the person paying alimony or included in income for the person receiving it after December 31, 2018. That sounds great for the person receiving alimony not so good if you must pay it. Casualty losses are no longer allowed unless it is from a presidentially declared disaster. Miscellaneous deductions have been removed which means union dues, tax preparer fees, uniforms, etc. will not be allowed going forward.

There are a lot of changes for the 2017 tax season. Be prepared to bring more information if you are claiming the Head of Household filing status this year.

Note: There may be some changes before the 2017 tax filing season starts.

Have a Fantastic Year and Enjoy Tax Season!

England, 2016: Thirty-Year Reunion, College of Medicine, Class of 1986, Ibadan, Nigeria

The gathering took place on Friday, July 29th through Saturday, July 30th, 2016, at De Vere Venues, Staverton Park, Staverton, Northamptonshire, United Kingdom.

Days before the event, a final list of who would attend was sent out. Everyone wanted to look their best coming into the reunion to impress their colleagues, many of whom they had not seen for thirty years, since medical school graduation.

In Australia, Switzerland, Canada, Nigeria, and the United States of America, colleagues packed their bags. Anticipation reached a crescendo. The women purchased glittering dresses, and the men shaved and dyed their hair. Only Moses left his gray to run amok, for which he earned the Wisdom Hair award.

When we arrived at De Vere venues, matching all the names on the list to all the faces on the ground proved a task. Unless friends revealed themselves, they were strangers.

In the mid-afternoon of Saturday, Salako, Provost of the College of Medicine, on the speech podium, glanced at a man who had entered the auditorium. The man wore a brown-colored, dome-shaped hat. ‘The hat,’ the stranger confessed, ‘is hiding badly-dyed gray hair.’ Sympathy and laughter welcomed him.

Following the ‘Remember to give back to Alma Mata’ speech, people zigzagged across the hotel vestibule to search for classmates.

‘Have you seen Fred Akpochafo?’ asked a sharp-eyed, toothily smiling fellow of a bespectacled man with an easy smile and pumped-up speech. ‘I am Fred,’ the guy in glasses responded.

Upon mutual recognition, Chinwe Nwokoma and Fred mobbed each other in fifteen-minute bear hugs and handshakes, following which both men suffered elbow dislocation.

‘Did you see Ntekim Bassey?’ the guy with the badly-dyed hair asked Barry. A croaky voice answered, ‘I saw him half a second ago.’

The longer people conversed, the more certain they were that a particular voice belonged to a particular colleague.

Ayo and I had exchanged many e-mails but not until Saturday was I able to match the person to the name. Yet he remained fuzzy in my memory. We continued to trade jabs of handshakes and hugs throughout the evening, waiting for a complete memory download.

Each handshake tugged on the memory. Each hug recruited more sleeping neurons. Yes! He is Ayo, his voice never left. It was just hiding, somewhere in the nuggets of the hippocampus. The same experience happened with Benjamin Oke, I think.

More mind authentication lazily occurred when I saw Ajibola and Osahon, Mase and Mojisola, Adebayo, Prof. Musa, Pal Loolo, Man Jaji and Evelyn, Kehinde and Sammy Best, Chuks, Essein, Tony N. and Taiwo. Peter Olukowi almost slipped away. ‘My father is Henry Akpabio,’ said a boy to me.

People such as President Yemi, Obi, Abolade, Emeka, Bolo, Onome, Peter Eweje, Ngozi, and Vero, I will never forget.

By the evening of Saturday, seventy percent of the class had been identified. More discoveries continued during dinner. Sunday morning and afternoon saw new revelations.

If Leslie owned Friday night by his picture-perfect poses, then Goze held the Saturday night by his dancing. Austin, Bhardwaj, Yinka, Titi George, Dayo, Ifeoma, and Adanna tried so hard to match him. Had Roro or Olaopa been there they would have given him a run for his moves.

Nobody could get enough of one another. The fellow with the poorly-dyed hair hugged Emma Nnopu thirty times to make up for the thirty years they hadn’t seen each other.

During dinner time, more surprises snuck up like forgotten bills. Awards exchanged hands. A shower of money rained on a baby. Members of the Adanta dance group soar through the air like teenage eagles. An entertainer who transferred two fast-spinning aluminum basins from his pinky fingers to broomsticks kept us on our toes for seven hours.

Except for a cashew nut-colored mustache, Peter Olumese remained the same in physique and character and was rewarded. And for adulating Professor Cole, Leex and his party won a group contest.

‘There you are’ the man with the poorly-dyed hair said when he finally spotted Ntekim Bassey.

‘Anselm, you have been looking for me, I understand’, Bassey said.

‘Yes, I have not seen you in thirty years.’

Suddenly, torsos, hands, and shoulders came together multiple times. Except for ten, maybe fifteen pounds’ weight gain Ntekim had not changed a speck. Later, in an unchanging, even, confident tone he conversed with the ever-graceful Moji, O.

How Olamide and her team were able to stretch the funds to the level of fun we had is mind-boggling. Kudos!

Before the trip, I made name tags for each person on the list, not knowing the faces who would occupy so many labels. Not anymore. Every face is in my consciousness.

For two reasons, the event in London would be hard to beat. Dancing legs are yet to reach a breaking point, but will be there soon. Secondly, almost everybody has been discovered within fifteen years since the reunion began in Memphis, Tennessee. If colleagues yet to attend show up in the next event, then all bets are off.

Thanks to prayers, led by Morafa and Dave, all the heavenly stars aligned together in harmony.

End

Why Gurgaon Has a Good Scope for Residential Projects in 2016

Some of the best residential projects are happening in the city of Gurgaon in the next 12 months. As the real estate market picks back up and the Indian economy continues to recover, this is one of the premier regions to find the best deals and most beautiful properties on the market. Here are a few reasons by Gurgaon should be your real estate destination in 2016.

1. A Wide Range of Options

One of the best aspects of Gurgaon real estate is the fact that there are many different types of homes available in varying townships. If you’re looking to spend a lot of money for luxury, you’ll be able find such an environment as easily as you can affordable housing. According to the Real Estate Times, the two types of buyers that have emerged in Gurgaon recently are those looking for residential property versus specifically luxury properties. Well-known real estate developer Unitech has recently put down new residential projects in Gurgaon that features luxury amenities. Not only do these types of townships boast the usual services, such as club houses, open green spaces, and excellent access to major roadways, but there’s another level of luxury now offered.

The Ivy Terraces, for example, are a group of properties situated within Wildflower Country and boast access to self-contained services such as schools, nursing homes, shopping areas, banks, and taxi stands. Luxury housing these days is an up and coming commodity, and if you’re looking for a wide array of options from which to choose, look no further than the townships and new projects in Gurgaon.

2. View from the Top

Don’t forget that although you may find a gorgeous flat to live in, you don’t want to forego natural beauty either. According to India Homes, one of the strongest reasons why Gurgaon projects are a good bet for investment is the fact that many apartments offer attractive views of the bucolic landscapes that surround the Millennium City. Properties are located within a more open setting than a city such as clogged and sometime claustrophobic nearby Delhi. Although larger cities and their surrounding suburbs are known for being major business capitals, Gurgaon has the best of both worlds. You can go to work in the Millennium City, or commute to a job in a larger city nearby, but then go home to both a beautiful, luxurious township filled with greenery. This is helpful in leading a life that’s balanced between personal enjoyment and peace, and hard work in your professional life.

3. The Economic Forecast Is Sunny

Gone are the dark days of the recession that were full of doubts and insecurities about the future as the national economy continues to improve. In fact, real estate experts reported to Business Today at the end of last year that it’s time to start investing again, especially due to the fact that prices in certain areas, including Gurgaon, have lowered due to various market factors. If you’re looking to get in on the ground floor to buy some of the best residential projects for 2016, Gurgaon is one of the safest areas in which to invest. Whether you’re seeking luxury or simply a decent home for an affordable price, the outlook in terms of investments and return are looking increasingly better as time goes on. Given that the current national government is also especially interested in expanding and fostering business and economic growth, there’s never been a better time to get back on the real estate bandwagon.

4. Developments Slated for 2016

The Hindustan Times reports that, due to Gurgaon’s rapid growth in spheres ranging from industry, business, and urbanization, it has the potential to become a forerunner in cities that are capable of self-financing. It’s a city on the rise, and the continuous growth of the corporate sector and companies setting down roots has ensured a steady flow of jobs, structure, and has served as a draw for many different types of property buyers. This includes everyone from expats to middle class professionals looking for a good property investment that will retain its value. Next year is shaping up to be a good year for many sectors, including the real estate market. Gurgaon itself is also continuing to meet many expectations of its residents, and growth hasn’t slowed down so far in 2015.

The year 2016 is slated to be an exciting time for the real estate market in India and new residential projects in Gurgaon, with new interest generated in emerging properties and reputable developers continuing progress in prime areas. The more buyers who are interested in these homes, the more demand will meet supply. Although the entire country experienced serious economic setbacks, as did the rest of the world in the past few years, recovery will continue into 2016. Act now to get in on some of the best deals in the real estate world, especially in fast growing locations like the Millennium City, and reap the rewards in years to come.

Successful Techniques and Point Losing KPI’s in Final Competitions of Karate World Championship 2016

Introduction

Karate is one of the most popular martial arts, and it is distinguished into two competitive disciplines: Kata and Kumite. Kata is a fight against fictitious opponents, whereas Kumite is a real match against one opponent where the two competitors, under strict rules, are free to move, kick and punch in defensive and offensive ways. (1)

Technique is the ‘proper pattern of movements to do a specific sport skill’. With regard to effectiveness, it is defined as the power to produce an effect (decided, decisive, or desired effect). In other words, a movement is effective if the execution achieves the objective(s) of the movement (e.g. accuracy, scoring, power, projecting the body as far or as high as possible, etc.). (2)

In a non-contact karate fight, punches and kicks must be controlled (without injury to the opponent) or stopped before contact with the opponent’s body. (3) In the context of kumite, punching (zuki) and kicking (geri) techniques are allowed at the head (jodan) and abdomen (chudan). Kumite competition is divided into team matches and individual matches. Kumite’s scoring system contains: 3 points (Ippon) are awarded for leg kicks to the head and the techniques of cleaning and throwing, which result in a final fall of the opponent or a final punch, 2 points (Waza-Ari) are adjudicated for kicks to the trunk and punches to the back, including the back of the head and neck. Finally, 1 point (Yuko) is awarded for single arm punches to the head and body. (4)

To achieve injury prevention, new rules are stricter about prohibited behavior for competitors, including excessive force used in dealing blows to permitted areas, to the forbidden areas (throat, arms, legs, groin, joints, and instep), blows to the face with open hand techniques, and dangerous or prohibited throwing techniques. Any illegal behavior results in a warning or penalty. (5)

Contemporary match analysis systems, whether based on conventional video coding of matches or player tracking technology, provide a rich source of quantitative data on how well skills are performed during competition. The collection of such data enables key performance indicators for a single player or the team as a whole to be identified. The performance indicators may relate to biomechanical, technical, tactical or behavioral measures of performance. (6) (For example in Kumite when missing point(s): wrong footwork, wrong weight-shifting, error of distancing, etc.)

Hughes and Bartlett have suggested that KPI’s are “a selection, or combination, of action variables that aims to define some or all aspects of a performance”. (7) knowing and having a good and practical understanding of successful techniques and KPIs in high level karatekas will definitely assist high performance coaches, technical experts, scientific researchers and the athletes to improve their planning and training programs which can lead to an enhanced performance. Thus, the aims of the current study were to divulge the successful techniques and point losing KPIs in final competition of Karate World Championships -Austria 2016 in order to help coaches and top level athletes in this newly Olympic included combat sport.

Methodology:

All the ten final competitions of male individual (Individual male weight categories: >84 kg, <84 kg, <75 kg, <67 kg, <60 kg) and team matches (without weight limit) in Karate World Championship 2016 have been downloaded in HD quality. There were five final matches for individual on the basis of their weight categories and also five matches for team final (Islamic Republic of Iran Vs. Japan; 3 out of 5 was the winner). All the critical incidents' footages have been analyzed, frame by frame by the help of Kinovea Video Analysis software (0.8.15) and the data has been entered in Excel Microsoft 2013 for more analyzing. Before the researcher goes for any data entrance, all the perturbations and critical incidents (N) were recorded with their full antecedents (N-1, N-2, N-3... ) in order to obtain more accurate KPIs. Then all the successful techniques (winning points) and point losing KPIs have been extracted by regarding the antecedents and critical points which started to occur by the referee hajime (start fighting) and finished by the referee yame (stop fighting).
Furthermore, for a better and stronger research result, two other Karate experts have been recruited. All the KPIs have been presented to them in order to have their ideas about KPIs and matches. Random scenes of some matches have been selected accidentally. After reaching a consensus on every aspects of KPIs and existed antecedents of the matches, the analysis has been started.

The matches have been analyzed twice with a fortnight interval between by the same researcher who is black belt and karate coach. All the data, then, has been gathered in Excel Microsoft 2013 for analytical objectives and records.

23 different techniques plus warnings were recorded. Techniques were as follows: Ashi Barai (foot sweep), Mae Geri (front kick), Jodan Mawashi Geri (upper roundhouse kick), Chudan Mawashi Geri (middle roundhouse kick), Mae Mawashi Geri (flip kick), Ura Mawashi Geri (hook kick), Ushiro Ura Mawashi Geri (spinning heel kick), Ushiro Geri (back kick), Yoko Geri (side kick), Kizami Zuki (Jab), Oi Zuki (lunge punch), Kizami Zuki Gyaku Zuki (jab + reverse punch), Kizami Zuki Oi Zuki (double face starting with front hand), Oi Zuki Kizami Zuki (double face starting with rear hand), Kizami Zuki Oi Zuki Oi Zuki (triple face), Gyaku Zuki (reverse punch), Uraken (back fist), Haito Uchi (ridge hand), Uke (block), Nagashi Uke (sweeping block), Osae Uke (pressing block), Head Movement (dodge), Mawashi Uke (roundhouse block). It was analyzed which of the above techniques have been used by competitors and, moreover, which were used by winners and losers the most. On the other hand, the point losing KPIs have been extracted by regarding point losers’ antecedents’ KPIs (31 antecedents’ KPIs and 26 point losing KPIs). In figure 1-1 you can see 31 antecedents’ KPIs and 26 point losing KPIs which were used in this study.

Result

A total of 345 points were awarded to the point winning competitors. Among them Oi Zuki (lunge punch) was the most used technique in the 2016 karate world championships finals with 90 total frequency for both winners and losers, regarding 15 for winning sides and 75 for unsuccessful tries; it means that approximately 83% of performed oi zuki by competitors were unsuccessful while only about 17% of them were successful. On the other hand the second place is for Kizami zuki with 87 total frequency for both winners and losers, regarding 22 for successful tries and 65 for unsuccessful ones. It is good to be mention that approximately 75% of the total Kizami zuki performed by competitors were useless and 25% of them were accepted by the referees.

It’s worth to be mention that 7 out of 15 successful oi zuki performances occurred in team matches and 8 out of 15 in individual finals. The rate of unsuccessful oi zuki performances belongs to individual matches with 52 tries while in team matches there were 23 misses by competitors.

As it is clear from statistics, there is a great tendency among individual matches for oi zuki performance which is in total (team successful & unsuccessful tries) 60 attacks by this technique while team competitions the fighters tend to use Kizami zuki more than any other techniques (total 48 successful & unsuccessful tries). If we compare these rates to the rate of the same research in 2009 by Laird & McLeod we will understand that there is a big switch from Gyaku Zuki (in Laird & McLeod research) to oi zuki and Kizami zuki in this 2016 final competitions. Laird & McLeod (2009) stated that the most frequently scored technique for all the fighters was Gyaku-Zuki to the body with 43.28% rate. However; in this new research on 2016 final competitions we reached to oi zuki and Kizami zuki as the most frequently scored and used technique, as you can see in above table, there is no Gyaku-Zuki technique as the most scored or frequently used technique.

O’Donoghue’s (2010) definition of performance indicators is a great starting point ‘A performance indicator must represent some relevant and important aspect of play’. (8). KPI represents key performance indicators.

In the (table 1) below table you can see antecedents’ (N, N-1, N-2, &… ) KPIs. In fact, what happens that a karateka lose a point (the process) and are the main reasons. So the point losing KPIs are placed into the antecedents’ KPIs. In other words in order to understand what are the main reasons for losing a point we should clearly know what where the process and what happened in this dyadic (combat sport 1 vs. 1) system. Having a good knowledge about antecedents’ KPIs can lead us to a result that why a point is lost.

Table 1: Antecedents’ KPIs

NO. Antecedents’ KPIs

1 PL starts an attack

2 PO starts an attack

3 Closeness for stimulation by PL

4 Closeness for stimulation by PO

5 PL gets closer

6 PO gets closer

7 Good footwork

8 Good weight-shifting

9 Wrong footwork

10 Wrong weight-shifting

11 Deceiving

12 Deceived

13 Good block

14 Good technique prevention

15 Incomplete technique performance

16 Complete confusion

17 Making PO imbalanced

18 Getting imbalanced by PO

19 Inappropriate stance

20 Good Stance

21 PL starts a counter-attack

22 PO starts a counter-attack

23 Error of timing

24 Error of distancing

25 Uncovered guard

26 Forced error

27 Wrong technique selection

28 Good technique performance

29 Delay in technique performance

30 Performing pre-scoring technique

31 Haste

A total of 222 point losing KPIs’ cases have been extracted based on the antecedents’ KPIs. Among them 25 out of 222 were the most point losing KPI which allocated to “Point Loser (PL) starts an attack”, it means that the karateka who lost the point was the man who started the attack. On the other hand and the second top (23 out of 222) was “Point Obtainer (PO) starts an attack”, it means that by the winning side attack the point loser got surrendered. In the (table 2) below you can see the five top point losing KPIs and their frequencies.

Table 2: Top 5 point losing KPIs

Point Losing KPI Name Frequency

Point Loser (PL) starts an attack 25

Point Obtainer (PO) starts an attack 23

Error of Distancing 20

Wrong Technique Selection 20

Delay in Technique Performance 13

Discussion and Conclusion:

In team final between Iran and Japan, there were 5 matches, therefore as you see from Table 6; for example, in “wrong technique selection” in 5 matches there were 5 cases of this type; however, the same KPI (wrong Technique Selection) in -60 kg kumite between Iran and Netherlands occurred 5 times which means equal to all the five team matches. So it shows that the higher speed competition causes the fighters make mistake in proper technique selection. As you see again in this weight (-60 kg) there was no (zero) “Delay in Technique Performance” which shows that in light weight a karateka should decide rapidly what to do or react against his opponent; so however there is no “Delay in Technique Performance” but there are a lot of “Wrong Technique Selection” equal to all five team matches. And our study showed that in team final competitions 7 “wrong footwork” (wrong displacement of foot) happened in five matches and it is a great amount in comparison to individual final matches in +84 kg and -67kg which no “wrong footwork” occurred. Even in comparison to all other three individual final matches in -84kg, -75kg and -60 kg, the rate of team final competitions are high in contrast to 3 in all other three above mentioned weight division (one for each); it shows the relative equality of weigh causes less “wrong footwork” and in the other hand the disparity of weights can lead to more “Wrong Footwork”.

One of our point losing KPI which shows the high class and level of karatekas is “Complete Confusion”. In -75 kg kumite between Azerbaijan and Egypt, the Azerbaijan karateka acted in a way that his Egyptian finalist faced complete confusion for two times. This shows the talent and skillfulness of this Azerbaijani fighter and this happened one time in -84 kg final between Japan and Azerbaijan and the Japanese karateka caused his opponent face a “Complete Confusion” and once again in -60 kg final between Iran and Netherlands, the Iranian Karateka completely confused his Dutch opponent. In other matches (either team or individual ones) there happened no “Complete Confusion” which shows that Azerbaijani (-75 kg), Japanese (-84kg) and Iranian (-60 kg) individual finalist made the differences.

This study showed that there is big shift from Gyaku-Zuki (reverse punch) in 2009 to Oi-Zuki and also Kizami Zuki in 2016 which send this message that karate is becoming more faster than previous years. In fact, Jovanovic (9) reported that the time needed to execute kizami-zuki was 0.11s, which is shorter than the time necessary for the gyaku-zuki execution (around 0.15s). (9) And the reason why karatekas are not more successful in foot stroke in comparison to fist stroke (according to Table 1: 35 unsuccessful Chudan Mawashi Geri and 0 successful) and also they used them a lot (Chudan Mawashi Geri the 3rd most frequently used technique), may Hafmann (2008) answer about more complexity of foot stroke in comparison to fist stroke be to some extent correct; however when it comes to destruction and breaking, one of the most speedy and powerful one is Chudan Mawashi Geri. The frequency is the 3rd amongst all attacking techniques but currently the karate coaches haven’t found a good way in this technique performance or may be their focus on this technique was not enough. In fact, from these statistics we can conclude that may be in near future Chudan Mawashi Geri becomes the top used and scoring technique. Further research needed to be done on this case.

References:

1- (Invernizzi, P.L.; Longo, S. & Scurati, R. (2008). Analysis of heart rate and lactate concentrations during coordinative tasks: pilot study in karate kata world champions. Sport Sci Health, 3, 41-46. doi: 10.1007/s11332-008-0053-7).

2- (McGarry, Tim; O’Donoghue, Peter; & Sampaio, Jaime (2013). Routledge Handbook of Sports Performance Analysis. New York: Routledge, 213)

3- (Macan, J.; Bundalo-Vrbanac, D. & Romic, G. (2006). Effects of the new karate rules on the incidence and distribution of injuries. Br J Sports Med, 40:326-330. doi: 10.1136/bjsm.2005.022459).

4- (Chaabene, Helmi, & Franchini, Emerson. (2015). Karate Kumite: How To Optimize Performance. OMICS Group eBooks: CA. doi: 10.4172/978-1-63278-062-1-063).

5- (Macan, J.; Bundalo-Vrbanac, D. & Romic, G. (2006). Effects of the new karate rules on the incidence and distribution of injuries. Br J Sports Med, 40:326-330. doi: 10.1136/bjsm.2005.022459).

6- (Carling, Christopher; Reilly, Thomas; and Williams, Mark (2009). Performance assessment for field sports. Oxon and New York: Routledge, 33)

7- (Ryan Groom, Neil (2012). Towards an understanding of the use of video-based performance analysis in the coaching process. Published doctoral dissertation, Loughborough University, Leicestershire, UK.)

8- (O’Donoghue, P.G. (2010). Research methods for sports performance analysis. Routledge: London)

9- (Chaabene, Helmi. (2015). Karate Kumite: How To Optimize Performance. OMICS Group eBooks: CA. doi: 10.4172/978-1-63278-062-1-063).

10- Hofmann M, Witte K, Emmermacher P, 2008. Biomechanical analysis of fist punches gyaku-zuki in karate. ISBS conference. July Seoul; (3), pp: 14-18

The Importance of AutoCAD Knowledge in 2016 and Beyond

CAD design courses are highly sought-after by those who are entering these fields or those related. Below, explore why AutoCAD is the most popular program for CAD design courses and a bit about its capabilities in each of these professions.

Architects

AutoCAD is quite easy to use, as it features built-in design layouts. Within the layouts are many templates that were created just for building, construction and architectural plans. So, once an individual has attended CAD design courses, they can accept projects that include design of architectural plans for building reasons, or replicate various structures with ease.

If builders and architects need analytical tools in order to troubleshoot things like load levels within a structure for support, they can do so with AutoCAD. The newer versions are far above where they’ve ever been, and it’s an exciting time for many. Having this knowledge before building on a physical work site is a blessing.

Graphic Designers

Many graphic designers prefer AutoCAD because the features within make it easy for users to plan spaces architecturally and utilize the available space in the best way possible. It can also be used at the same time with Maya, 3D Max and other animation and design tools whenever necessary.

Further, AutoCAD’s support of DXF and DWG files and the ability to export them to other CAD apps means that graphic designers can enjoy AutoCAD for creating structures and architectural ideas for future designs, additions or models.

Engineers

When it comes to Mechanical, Civil, Systems and Electrical Engineering among other related fields, computer-aided drafting and design is an important tool because it lessens the threat of human error. Consider the creation of infrastructure and components, and even studying systems like the HVAC within a home or business. AutoCAD is invaluable. Yet another reason CAD design courses are so important.

The program is most desirable because professionals claim the special drafting tools easily and accurately brings their ideas to fruition. Not only is it used in creating systems, it helps with fixing any problems that may arise.

Fashion Careers

CAD design courses are also useful for those wishing to work in the fashion industry. Designing intricate shapes is something that AutoCAD can do with ease. If ever gazing upon a beautifully cut gemstone, perhaps it’s never occurred that design didn’t happen by chance. CAD carries the needed tools to create all types of fashion items with its intuitive interface that can tackle not only simple shapes but also tetra hedrons, octagons and the huge variety that exists within the fashion industry.

Experts are able to draft and design pretty much anything they can dream up, which plays a huge role in being fashion-forward and possibly making a name for oneself.

Three-Dimensional Printing

3D printed items require one to go through an intricate process that needs AutoCAD. First, they must choose the item, then create a 3D version, then feed that into the printer. This design and modeling tool software plays the most important part and enthusiasts to this new form of printing are loving creating models this way.

AutoCAD makes sure file compatibility is never an issue. Those who have taken CAD design courses can export designs on the favorite .stl format which most 3D printers are compatible with, as well as slicing software.

These are just a few of the uses for AutoCAD in 2016, who knows what more the software will be capable of in the future, as it is continuously updated to be compatible with the current needs. There are so many careers and industries that turn to this trusted design and drafting software that it pays for even those who have already taken courses to enroll in refresher CAD design courses on a regular basis.

Best SEO Services in 2016

SEO is used to increase visitors to a site by different methods and technologies. These techniques are used to get a high rank in Google and search engines. Web sites are featured by search engines in search results according to a ranking of a site. SEO techniques help to get a high ranking site with a lot of visitors and other trusted websites.

According to studies and searches, traffic on a site always depends on the search result. When people search something, they use the sites that are high ranked, and those sites which are featured on the top by search engines get more traffic as compared to others. These techniques also include social media. When you use SEO techniques, you also remain in touch with the visitors with social media, and this also increases ranking. There are many techniques used in this like social media advertising and articles advertising etc. Our SEO services are according to the Google latest updates and result oriented.

One of the most used techniques is social media advertising. This is used to contact visitors like Facebook, Twitter, etc. For this purpose, many social media buttons are used on websites to get in touch with visitors. When you use this technique, people trust more to your website, and they connect their sites to your site which is also important to get a high rank on search engines.

Some other buttons are also produced on sites which are connected to paid ads. These are related to social media, so when visitors click on them they use social media to connect to your site; also you get money by paid ads. Some other techniques of social media are useful which include building social campaigns. These social campaigns will increase conversations on your site like in the form of comments about a particular topic. It also create a high rank.

Another SEO technique is article advertising. Headlines are also important to attract visitors. One perfect headline can build an active audience to a site which is directly related to the article about a product or anything else.

You can do promotions about a product to increase visitors to your site. Getting in touch with some other site by different promotions is the best way to build a high trust. You can briefly explain about something in an article that will increase audience. Internet marketing can also be done by using article advertising. The above SEO techniques are used to rank any type of site high.

2018-2023 Mitomycin C Market Research: Global Industry Analysis and Forecast

In this report, LP Information covers the present scenario (with the base year being 2017) and the growth prospects of global Mitomycin C market for 2018-2023.

Mitomycin C market, Mitomycin C is an antibiotic which acts as a double-stranded DNA alkylating agent. It covalently crosslinks DNA, inhibiting DNA synthesis and cell proliferation It acts by way of reductive activation either through low pH or NAD(P)H:quinone oxidoreductase (DT-diaphorase) or NADH cytochrome c reductase (Mao et al.; Cummings et al.).

In the last several years, Global market of Mitomycin C was experienced an upward trend rapidly, with an average growth rate of 4.76%. In 2016, Global Revenue of Mitomycin C is nearly 119.83 M USD; the actual production is about 17370 K Unit.

The global average price of Mitomycin C is in the increasing trend, from 6.30 USD/Unit in 2012 to 6.90 USD/Unit in 2016. With the situation of global economy, prices will be in increasing trend in the following five years.

The classification of Mitomycin C includes 2 Mg, 10 Mg, 40 Mg, and others. The proportion of 2 Mg in 2016 is about 41.5%, and the proportion is in decreasing trend from 2012 to 2016.

Mitomycin C is widely used in Cancer Treatment, Ophthalmic Use, and other field. The most proportion of Mitomycin C is Cancer Treatment, and the proportion in 2016 is 69%. The trend of Cancer Treatment is decreasing.

Japan is the largest supplier of Mitomycin C, with a production market share nearly 26.5% in 2016. India is the second largest supplier of Mitomycin C Media, enjoying production market share nearly 25% in 2016.

North America is the largest consumption place, with a consumption market share nearly 36% in 2016. Following North America, Europe is the second largest consumption place with the consumption market share of 32.6%.

Over the next five years, LPI(LP Information) projects that Mitomycin C will register a -2.3% CAGR in terms of revenue, reach US$ 100 million by 2023, from US$ 120 million in 2017.

This report presents a comprehensive overview, market shares, and growth opportunities of Mitomycin C market by product type, application, key manufacturers and key regions.

To calculate the market size, LP Information considers value and volume generated from the sales of the following segments:

Segmentation by product type:

2 Mg

10 Mg

40 Mg

Other

Segmentation by application:

Cancer Treatment

Ophthalmic Use

Others

This report also splits the market by region:

Americas

United States

Canada

Mexico

Brazil

APAC

China

Japan

Korea

Southeast Asia

India

Australia

Europe

Germany

France

UK

Italy

Russia

Spain

Enquire Here & check discount for report@:

https://www.reporthive.com/enquiry.php?id=1565680&req_type=disc

The report also presents the market competition landscape and a corresponding detailed analysis of the major vendor/manufacturers in the market. The key manufacturers covered in this report:

Kyowa-kirin

Intas Pharmaceuticals

Teva

Bristol-Myers Squibb

Aspen

Speciality European Pharma

Alkem Laboratories

Varifarma

APOGEPHA

In addition, this report discusses the key drivers influencing market growth, opportunities, the challenges and the risks faced by key manufacturers and the market as a whole. It also analyzes key emerging trends and their impact on present and future development.

Research objectives:

· To study and analyze the global Mitomycin C consumption (value & volume) by key regions/countries, product type and application, history data from 2013 to 2017, and forecast to 2023.

· To understand the structure of Mitomycin C market by identifying its various subsegments.

· Focuses on the key global Mitomycin C manufacturers, to define, describe and analyze the sales volume, value, market share, market competition landscape, SWOT analysis and development plans in next few years.

· To analyze the Mitomycin C with respect to individual growth trends, future prospects, and their contribution to the total market.

· To share detailed information about the key factors influencing the growth of the market (growth potential, opportunities, drivers, industry-specific challenges and risks).

· To project the consumption of Mitomycin C submarkets, with respect to key regions (along with their respective key countries).

· To analyze competitive developments such as expansions, agreements, new product launches, and acquisitions in the market.

· To strategically profile the key players and comprehensively analyze their growth strategies.

Read full Research Report Study@: https://www.reporthive.com/enquiry.php?id=1565680&req_type=purch

Table of Contents:

Chapter One: Scope of the Report

Chapter Two: Executive Summary

Chapter Three: Global Mitomycin C by Players

Chapter Four: Mitomycin C by Regions

Chapter Five: Americas

Chapter Six: APAC

Chapter Seven: Europe

Chapter Eight: Middle East & Africa

Chapter Nine: Market Drivers, Challenges and Trends

Chapter Ten: Marketing, Distributors and Customer

Read More…

List of Tables and Figures:

Figure Mitomycin C Consumed in Cancer Treatment

Figure Global Mitomycin C Market: Cancer Treatment (2013-2018) (K Units)

Figure Global Mitomycin C Market: Cancer Treatment (2013-2018) ($ Millions)

Figure Global Cancer Treatment YoY Growth ($ Millions)

Figure Mitomycin C Consumed in Ophthalmic Use

Figure Global Mitomycin C Market: Ophthalmic Use (2013-2018) (K Units)

Figure Global Mitomycin C Market: Ophthalmic Use (2013-2018) ($ Millions)

Figure Global Ophthalmic Use YoY Growth ($ Millions) and know more…

Rio De Janeiro to Host the 2016 Summer Olympics and Paralympics

The Cidade Maravilhosa will be the first South American city to play host to the Summer Olympics 2016. All the competitions except for football will be held inside the city of Rio. Barra, Copacabana, Deodoro and Maracana are the four Olympic zones where the competitions will take place whereas Belo Horizonte, Brasilia, Salvador and Sao Paulo are the cities where the football matches will be held. The Summer Olympics and the Summer Paralympics will tentatively range between August 5 to 21 and September 7 to 18 respectively.

When Rio was nominated as the Brazilian host candidate for the 2016 Summer Olympics and Paralympics, the Brazilian Olympic Committee (BOC) and the Federal Government was highly supportive of its candidacy. The BOC felt that Rio is the right place to host the Summer Olympics because it has the first-rate facilities for the different Olympic competitions as well as the accommodations for the thousands of athletes and tourists who will be staying in Rio for the whole length of the event. Carlos Arthur Nuzman, and the former Rio de Janeiro mayor, Cesar Maia gave their full support and approval for Rio’s candidature.

Rio de Janeiro has hosted several important international competitions which makes it equipped to play host to the Summer Olympics. Back in 2007, Rio hosted the XV Pan American Games and the III Parapan American Games. The IPC even declared that the III Parapan American Games was the best ever in history. Brazil will also be the host country of the 2014 FIFA World Cup. The decision of the BOC to choose Rio over the other contenders was formally announced on September 1st of 2006 during the Annual Assembly. It is Rio’s first successful attempt in becoming the host city for an Olympic event after failing to make the cut in the 1936, 1940, 2004 and 2012 Olympics.

On May 16, 2007, the 2016 Summer Olympics and Paralympics bidding process commenced. The IOC received seven candidates, Baku, Chicago, Doha, Madrid, Prague, Rio de Janeiro and Tokyo. The 2016 Applicant Cities Seminar was held on Lausanne, Switzerland on October 18, 2007 which was attended by the bid committees from the different candidate cities. Each of the candidates are required to submit an Applicant File which should give descriptions, strategies and project overviews to answer the IOC’s 2016 Candidature Acceptance Procedure and Questionnaire. The IOC Working Group and the IOC Executive Board are in charge of deliberating the Application Files of the 7 candidates.

On June 4, 2008 in Athens, the final four was officially announced by the IOC. The shortlisted cities were Chicago, Madrid, Rio de Janeiro and Tokyo. The cities were judged according to eleven criteria: government support, legal issues and public opinion; general infrastructure; sport venues; Olympic village; environment conditions and impact; accommodation; transport concept; safety and security; experience from past sport events; finance; and overall project and legacy. The weighted averages of the cities were: Tokyo – 8.3, Madrid – 8.1, Chicago – 7.0, Doha – 6.9, Rio de Janeiro – 6.4, Prague – 5.3, and Baku – 4.3. Despite Doha having a higher average than Rio, the IOC still chose Rio to be part of the shortlist. This decision raised political criticism but the reason for Doha’s bid to be rejected was due to its proposal of staging the Summer Olympics in October to avoid the extremely high temperatures instead of the usual mid-summer period.

During the 2008 Summer Olympics in Beijing, China, the four shortlisted candidates took part in the Olympic Games Observer Program. The candidates were also required to submit a Candidature File which should contain detailed answers to 300 technical questions of the IOC. From April 2 to May 9, the IOC Evaluation Commission embarked on an on-site inspection of the four candidate cities. On October 2, 2009, the decision was released in Copenhagen, Denmark.

Major plans for the Summer Olympics are being implemented in Rio. Olympic lanes connecting the four proposed Olympic zones and the Antonio Carlos Jobim International Airport will be built. Olympic villages with accommodations and training facilities will be dedicated to the athletes. Media villages and hotel rooms will be allocated to the media who will be covering the event. Rio’s Bus Rapid Transit (BRT) system is the primary mode of transportation to the different locations within the city. The Federal Government has strategies to ensure safety and security.

Aside from creating facilities for the traditional Olympic Games, Rio’s bid committee also added its proposal for accommodating some new sports that may be added to the Olympic Program. The bid committee proved itself capable of staging baseball, golf, karate, roller sports, rugby, softball and squash.

Ana Soter designed the logo of Rio’s candidature which was accompanied by the slogan, “Live your passion”. It is highly reflective of the Brazilian’s passionate involvement in accomplishing whatever they want or need to do. On the stroke of midnight, the logo and the slogan was projected on the 36-meter Ferris wheel right after the ten-second countdown to the beginning of the New Year of 2009. The summer of 2016 will be one of the most memorable summers of the decade and Rio de Janeiro is definitely the place to be during August to September of 2016 under the Olympic Games!

Freelance Web Designer | WordPress Developer | Hong Kong