What You Need to Know About Buffering Agents

A buffering agent helps prevent a rapid change in pH of a solution when other substances are added or mixed with the solution. For example, most shampoos are buffered so that they are slightly acidic. The buffer counteracts the alkalinity of soap. If either of these substances become too acidic or too alkaline, they could damage your skin and hair.

Human blood pH should be slightly alkaline (7.35 – 7.45). Below or above this range would cause symptoms and disease. If blood pH moves below 6.8 or above 7.8, cells stop functioning and the body dies. The body, therefore, continually strives to balance pH. Many forms of life will survive only within a relatively small pH range so they utilize a buffer to maintain a constant pH.

Another example of how a buffering agent is commonly used is in aspirin. Without buffering, aspirin can irritate the lining of the stomach and lead to serious medical conditions such as bleeding and ulcers. The antacid properties of buffering agents are thought to help maintain the pH balance and and may help prevent side effects. Whether aspirin buffers actually work is still controversial.

The most common problem with aquarium water chemistry is pH. Although most fish will thrive in a wide range of pH, rapid changes may cause stress leading to disease or death. Though some exotic fish such as Discus are more particular about pH, even most of these fish are only particular about pH when they are breeding. The fish will not spawn if the proper pH is not maintained. There is a growing trend to believe that the pH in a fish tank needs to be around 7.0 which in most cases in simply not true for fish. However, in aquaponics, we also have to consider the pH requirements of the plants. Plants, in general, in water that has a lower pH than ordinary tap water.

If your tap water contains buffers, and almost all tap water does, it probably keeps the pH around 8.0 or slightly alkaline. This can make it difficult to lower the pH in your tank. The water will maintain a high pH because of the buffers. You will need to add enough acid to neutralize the buffer. However, by the time you have added enough acid to overcome the buffer, you will have enough acid in the water to cause a precipitous drop in pH.

Water has a pH of 7 naturally, but the water you are using in your tank may be different because of the chemicals that are suspended or dissolved in the water. These chemicals fall into three categories: acids, bases, and buffers. Acids are chemicals that lower the pH, or make the water more acidic. Bases are chemicals that raise the pH of the water, or make it more basic (or alkaline). Buffers are chemicals that can prevent changes and keep the water at a specific pH. Different buffers will keep the pH at different values.

If you need to lower pH, you could add some type of acid. Muriatic acid is commonly used to lower the pH of swimming pools. If you need to raise pH, you could add a product that is alkaline such as sodium carbonate commonly know as soda ash.

In simplistic terms, a buffer would be something that has both acid and alkaline properties. When pH starts to rise, the buffer would release acid to reduce pH. If the pH begins to decrease, the alkaline agent would be released to increase the pH.

If you are Walter White (Breaking Bad), you will probably mix you own buffers. However, most of us will be better off buying a commercial product that is formulated to keep pH at a certain level. Seachem, for example, is one company that makes buffers that will work for most aquaponic applications.

Fielding Tactics for Players New to Tee Ball

With players new to the game, the coach must ensure that he/she begins with a simple game plan and develops it in stages. Below is what was suggested to new coaches to Tee Ball as the stages to develop as the players mature in the game.

Stage 1:

1. All infield fielded balls are thrown to first base (if there is a chance of getting the runner out). Otherwise, the fielder raises the ball above the head to prevent further running.

2. If the ball is not fielded cleanly in the infield, the fielder raises the ball above the head to stop further running.

3. No early attempts should be made to get a runner out at home base.

4. Balls in the outfield are thrown to the nearest infielder who raises the ball above the head inside the diamond to prevent further running.

5. In an attempt to get the runner out, the ball should only be thrown once and then held up. Discourage players from chasing the runner around the diamond and/or throwing the ball after the runner.

Stage 2:

Teach the players about forced plays. Explain that, in a forced play, the baseman needs only to catch the ball and touch the base with the foot to get the runner out. Then, demonstrate to the players on the diamond, when a forced play is on. (This is good coaching both for when players are fielding and being a runner).

Stage 3:

Next double and triple plays should be explained and practised. Also, explain that a double and triple play is possible after a catch is taken.

Once the catch is taken, explain where to throw the ball to get the extra out.

Stage 4:

Teach your players when they need to tag the runner at the base or running past them in the diamond as they field the ball.

In all situations, encourage the fielder to know where they will throw the ball before they field it.

Encourage them to throw the ball for the easiest out e.g. the nearest base or first base if there are two outs.

With outfield hits, teach your infielders to run towards the outfielder to shorten the outfielder’s throw. This allows the infielder to get the next throw quickly into the infield to stop the play or get an out.

Reasons to Trade Binary Options

Options trading tends to confuse many people, especially people who are new to investing and trading. While there are complex formulas involved in options trading, almost all of that stuff takes place behind the scenes and the person doing the trading doesn’t really need to know any of it. In theory, options are very simple: they are basically a bet that, as of a certain time in the future, the price of a stock will be above or below a specified price (called the strike price).

So people attempt to profit from buying and selling options in much the same way that they try to profit from buying and selling stock, with different strategies based on whether they think price will go up or down in the future.

Some of the complicated formulas come into play when pricing options. The price of an option will change constantly as the price of the underlying stock changes, and there is also something called “time premium” built into the value of an option. What this basically means is the longer an option has until expiration, the more extra price is added into its price. When you think about it this makes sense, as an option with an expiration date far into the future has more time available for the price of the underlying stock to move above the option’s strike price. In other words, an option expiring in 5 minutes only has 5 minutes remaining for price to move above its strike price (if it hasn’t already), but an option expiring in 5 days has a much greater chance of that happening.

Binary options are a specific type of option that pay “all or nothing” depending on the price of the underlying stock at expiration.

There are a few reasons why a trader may wish to consider binary options, and these include:

Simplified profitability – if the stock price is above the strike price at expiration, you get paid. If not, you don’t. No crazy formulas to keep track of.

Limited risk – every possible outcome is known beforehand, so there are no possible surprises where you can end up owing people more money than you initially invested (something which happens from time to time with option trading, and one of the reasons why people tend to think “options can be dangerous.”

Availability – as binary options continue become more popular, there are more and more brokers who are offering them to traders.

Remember to always read the terms of your broker before beginning to trade.

Various Functions of a Credit Card

Today, credit cards have many functions and are very versatile. They can be summarized into the following functions:

Credit

The holder may obtain extended credit up to an agreed limit at a published interest rate.

Charge

The holder can repay the whole amount at the end of the month, without charge provided no cash advance has been taken.

Cash

On presentation at the appropriate banks, subject to check, cash can be obtained. In most cases can also be used in ATMs to obtain cash.

Cheque guarantee

A cheque drawn on a bank may be guaranteed up to a published limit provided it is accompanied by a Cheque Guarantee Card (or in some cases a Visa or Mastercard card) issued by the bank on which it is drawn.

Cheque encashment

Cheque guaranteed as above may be used to obtain cash from branches of most banks, although a charge may be levied in certain circumstances.

International

If the card is a member of Visa International or Mastercard International, you can use your card at many countries where there are a lot banks who are members of them.

Perhaps the most significant fact to emerge from the summary of card functions is that strictly speaking, they are not debit cards. Although they can be used to obtain cash via ATM, the debit will be made from the credit card account and not from the holder’s bank account.

The credit cards discussed above are bank cards. Different bank cards have different card functions. The functions of bank cards really depend on the individual bank itself. Some bank card may have all of the above functions and some may not.

There other credit cards that are issued by retail stores such as Petrol Card, Quasi Card and Private Label Card which may have some of the above functions mentioned above.

Use The Powerful Energies From The Full Moon To Send Healing To The World

To give and receive healing at full moons, the energies are super-charged, it’s really strong. What I usually do, is that after I have wrote my own list of all the things that I want to leave behind, the changes I want to take place etc, I also do a little “world healing ritual”.

All that is needed is your heartfelt desire to bring good to the world, that’s all. No matter if you are, or have never been into anything that has to do with energy at all. All that is need is your Loving heart and wish for peace in the world.

Here’s the ritual:

  • See yourself as a body.
  • Rise above your body, as you see yourself rising above your body, rise – rise – see yourself being above your home/house (or wherever you may be) “see” the houses around you, the city you live in, and send bright light of love to all the people that live there, all the people, children, animal, plants and everyone you “see” driving around in their cars and walking on the streets.
  • Rise even higher..

See your whole community, all the schools, farms, corporates, businesses, politicians (yes, the “bad” too) and everything. “See” every person, every tree, every little plant. See your family, your friends, see all people, all animals in your life.

Rise even higher above your own body, see your whole country below you – send beams of light and love to them all.

Rise even higher, until you see yourself as a little spot standing on the earth, rise– rise– and send across the borders of your country, send Love.

  • Rise even higher..

See yourself as a little ant standing on the face of the earth, see the borders of every country around your own country, keep sending white, bright love everywhere, to every person, every car you see when look down on the earth, every farm, every little child in every room in every house you can “see”.

  • Rise even higher..

You see the world. The whole planet is below you now.

Take the world, hold it in your hands. Hold it, let bright light of love come form you hands into the whole world, spread the love, BEAM it to it all, through your hands.

You’re holding the world in your hands, send love, love, love.

Just hold for a few moments, and then let go with a blessing and prayer of peace and love to everyone, everywhere. Bless the world.

  • Let go and return back to your body.

Feeling good, don’t you agree? Ah, it’s so awesome! You did this. Think what an impact this exercise will do for the world, it’s all in your intention!

Because of you, there is peace to be found on some level in every person, plant and situation you just envisioned. Know that you have participating in bringing peace to the world. You really did, and I thank you for it.

Thank you for sharing and spreading your inner light. Thank you.

I sure received it. And I did it because you shared it.

Volleyball Systems and Strategies:A Book Review

Volleyball Systems and Strategies is a book put together by USA Volleyball based on the work done in its Coaching Accreditation Program (CAP). It is a very comprehensive look at the next level of volleyball above that of individual skill, namely how a team plays as a unit. To that end I think it has the potential to be very useful for new and developing coaches, and anyone thinking about how they can try to maximize the performance of their team given the types of players at their disposal.

There are six primary sections to the book:

  1. Serve, Transition, and Serve Receive looks at the types of serves available (float, jump topspin, etc.) and team serve receive patterns.
  2. Defensive Systems describes ways a team can be set up in terms of both floor defense positioning and blocking.
  3. Defensive Strategies looks at different ways the systems above may be employed based on the strengths and weaknesses of your team and/or your opponent.
  4. Offensive Systems focuses on the different ways an offense can be configured, such as the 5-1 or 6-2.
  5. Offensive Strategies discusses different ways of employing an offensive system to put your team’s attackers at the advantage.
  6. Systems, Strategies, and the Team concentrates on developing good training plans and handling the team will before, during, and after matches.

Each section of the book is broken down into chapters which focus on one aspect of the bigger subject. These chapters generally feature the following elements:

  • An initial description of the system or strategy
  • Personnel requirements
  • Advantages and disadvantages
  • Options for implementation
  • Coaching points

The final chapter of each section (except for the last) lists a number of drills aimed at working on the system or strategy covered. There are as many as 20 drills listed. That should provide the reader coach plenty to work with to help integrate the system(s) in to their team’s play.

There’s a companion DVD with the book which covers the primary topics listed above, excepting #6. It also shows some of the drills included. It’s about an hour in length.

There’s a lot of material in Volleyball Systems and Strategies, but it’s pretty concisely and clearly presented. I think it’s safe to say that if the reader can grasp it all they will be well on their way to being able to find the right systems and strategies for any team they coach, regardless of competitive level. That’s why I give it a good recommendation.

Tips to Resolve "Journal Inode is Deleted" Error

A Linux based computer system becomes unbootable in case its file system gets corrupted or damaged. In most of these situations, a Linux user encounters an error message that does not allow him/her to access the data saved on the Linux hard drive. Few main causes for corruption in file system (either EXT4, EXT3, or EXT2) can be improper system shutdown, inode corruption, superblock damage, virus infection, accidental system shutdown, and operating system malfunction.

To overcome such situations, the user needs to repair the damaged file system using ‘e2fsck’ command. This command checks and repairs the corrupted files system in almost all cases. However, the command does not ensure 100% repair in all file system corruption scenarios. For cases where the above command fails, the user needs to reinstall Linux operating system and then restore data from an updated backup. But, in the absence of a valid backup, you will need to opt for a commercial Linux Recovery application.

To illustrate the above situation, consider a practical scenario where you encounter the below error message while trying to boot your Linux system:

“ext2fs partition type 0x83….. ext3-fs: journal inode is deleted….mount: error 22 mounting ext3 error 2 mounting name switchroot: mountfailed:22 umount/initrd/dev failed:2 kernal panic – not syncing.”

Once the above error message flashes on your screen, the system becomes unbootable, further resulting in inaccessibility of hard drive data.

Cause:

The above error message appears when the files gets corrupted or damaged.

Resolution:

Follow the below guidelines to resolve the above error message:

1. Run ‘e2fsck’ command to repair the corrupted file system.
2. In case, the above command fails to repair the file system, follow the below steps:

Reinstall the Linux operating system.
Restore the data from an updated backup.
For cases where there is no backup available, use a third-party Linux Data Recovery software.

A Linux Data Recovery utility is a powerful tool that is specifically designed to recover data post clean reinstall of Linux operating systems. Such tools are very easily understandable and do not require any technical knowledge.

Stellar Phoenix Linux Data Recovery is a safe, fast, and effective Linux Recovery utility that recovers data from formatted Ext4, Ext3, Ext2, FAT file system based volumes. Supported by almost all Linux distributions, the utility recovers every file and folder, irrespective of its type and size. This powerful repair tool includes functionalities like hard drive cloning, create image, and S.M.A.R.T.

Lawn Fertilizer – Fall Vs Winterizer Fertilizer – What’s the Difference?

Over the years I have defined a difference between a “Fall” lawn fertilizer and a “Winterizer” fertilizer. These two types of fertilizer really address the root growth and winter hardiness of Kentucky Bluegrass.

Physiologically, grass produces an excessive amount of new roots in the spring and also in the fall when the temperatures are cool, soil moisture is high and primary nutrients for root development are readily available.

Roots of Kentucky bluegrass develop from the underground nodes of the rhizomes and from the basal nodes of the above ground shoots called the crown. Roots also develop at the terminal nodes of rhizomes that emerge above the soil as shoots.

Root growth is greatest in fall, followed by the spring period and slows to almost stops during the high heat in the summer. Root growth of Kentucky bluegrass peaks at soil temperatures of 60F and declines sharply as temperatures rise above 70F. Root growth practically ceases at temperatures above 80F.

FALL fertilizer should be applied when the soil temps start to hit 70 degrees until the soil temps reach the 55 degree mark. A true Fall fertilizer is designed to build new roots for the grass plants by supplying additional phosphorus (P) and Potassium (K), which are the primary nutrients needed to produce new healthy roots. This dose of “P & K” stimulates and supports new root growth, so your lawn is able to “dig in” and get ready for the cold weather. Fall fertilizer also prepares your lawns root to utilize 100% of the Winterizer fertilizer which should follow 4-5 weeks after the fall fertilizer application.

Carbohydrate accumulation and storage in these newly formed roots is the name of the game when it comes to the next stage of nutrient that will be applied.

WINTERIZER fertilizer on the other hand is a fertilizer which is intended to be applied after the grass plant has created all those new, EMPTY roots and just before the ground freezes solidly (or in the case of cheep skates, the one of two application of fertilizer they offer their lawn each year). It is also possible to have this fertilizer activated by those first of the season,wet snow storms or the rains that always come a few weeks prior to that first snows that stick. So In other words, Don’t be concerned with keeping your sprinkling system up and running into December just to water in or activate the winterizer application.

The role of this HIGH NITROGEN ( 1.5 – 2 pounds of active Nitrogen per 1000 square feet) application is to supply the maximum amount of nitrogen that can then be converted into stored, usable carbohydrate before the soil freezes up. This application helps feed the plant through the winter in the southern areas or prepares the cool season grasses for the longer winter ahead. Another benefit from this application is the EARLY Greening Up of your lawn or clients lawn next spring.

To summarize, Carbohydrate accumulation in rhizomes peak in late fall when “above ground” or shoot growth of Kentucky bluegrass slows. As temperatures become favorable for growth in the spring, these carbohydrate reserves become available for development of new shoot growth again.

In essence, this application will “tuck your lawn into bed” and keep it safe during the long, harsh winter allowing it to emerge in the spring as the Champion that all your neighbors will be envious of! Green with Envy!

E-Currencies and Money Part 3 – Money, Investment, Payment System, Or All of the Above?

Wikipedia defines money by its use as “a medium of exchange, a unit of account, and a store of value.”

Currency is but one form of money, and fits in the first category of this definition. Currency is also the smallest component of what economists define as the “money supply.” The money supply includes different components such as credit, deposit accounts, and the like.

Since virtually all e-currencies are used as units of value in exchange for goods and services, virtually all of them qualify as money and as currency. I further am of the opinion that Visa(tm) and MasterCard(tm) dollar units are also currencies, though the companies don’t like you to think of it this way (this view may be controversial to some). In fact, credit card accounts are the most widely used e-currencies in circulation today. I will go further and state that the distinction between currency and e-currency is, in fact, virtually zero in today’s electronic world.

The more interesting distinction is between government-issued (call them “public”) currencies and those that are issued by private companies (call them “private”).

With the introduction and widespread adoption of PayPal, private (e-)currencies suddenly became a hot topic. PayPal was one of the first private currencies tied neither to a government nor to a credit card issuer. But, private currencies are certainly nothing new. The original currencies in existence in the United States were in fact privately issued “Bank Notes” issued by banks in the US. They served a very important purpose in the early days of this country, since they had value independent of whether the US continued to exist as an independent country. (Go visit a coin shop and you can see some of these interesting documents.)

The original US bank notes were generally backed by a precious metal – in fact, they were often gold or silver certificates that could be exchanged for the precious metal at the bank if you wished. A bank account was a stash of gold for which you were given certificates. The US government later issued their own currency, and these were also gold or silver certificates. Those days didn’t end until 1972, when the US “went off the gold standard” which pegged the value of a US dollar to a certain amount of gold. Up until that time, the US government was required to back up the value of its money with gold held in depository facilities around the country. Fort Knox is the most well-known of these facilities, but by no means is it the largest.

It is in this context that we must look at the private e-currencies in circulation today.

All currencies are backed by something which establishes its value. The easiest to understand are gold-backed currencies. The units of value of such a currency is tied to some amount of gold held in reserve someplace “safe.” You can in fact still purchase gold certificates, just not from very many governments. Usually they are issued by gold-mining related companies who will issue a certificate to represent ownership of gold held in their vaults (“paper gold”). Make it a bearer certificate, and it’s pretty much gold-backed paper money.

The next easiest to understand is a currency-backed currency (such as PayPal is). For example, some smaller countries issue their own currencies at a fixed rate in relation to the US Dollars it holds in its own reserve. These are dollar-backed public currencies. There is no shortage of dollar-backed private currencies – one of the first was the traveler’s check. Merchants accept these pieces of paper because there is a well-financed, trust-worthy company who will accept that paper in exchange for US Dollars. Visa, MasterCard, and others also back their currency with US Dollars (and other currencies). Their units have value because merchants believe that they will (usually) receive a public currency in exchange for the units stored electronically in their accounts. Yet in reality, merchants value credit card units significantly less than the currencies that are held in their accounts. The reasons behind this are chargebacks and fees (as well as hassle factor). However, merchants are not permitted to charge consumers more due to their agreements with these credit card companies. As a result, even cash customers pay more for goods and services from these merchants (and why you should always demand a 2-3% discount when paying cash).

One mystery is why public currencies that are not backed by anything of value have value. These currencies are often called “fiat” currencies because people take them at face value based on confidence in the issuing government. But this is only part of the story. In reality, these currencies have value based on several factors. First, they are the only way to settle debts to the government (in most countries). Therefore if you owe taxes, you had better have some of these around. The second often overlooked component of value is the earning power of its population of people and corporations (more or less the current and future gross domestic product, or GDP, of that country). In fact, I would claim this is the most important factor when considered in combination with the monetary and other policies of the government in question.

To understand why, look at the global bond and bill market. The us government borrows billions and billions of dollars from investors and foreign governments every year. It must do this in order to finance its budgetary deficits, which of course include debt interest and principal payments. The US government enjoys a very low interest rate on its debt. The reason for this is a high level of confidence in the world that the US will repay that debt very reliably and predictably. Why does the world have such confidence in the US government? Because of its ability to collect taxes from its citizenry!

If the US government suddenly repealed all of its taxes, the value of the dollar would plummet as investors lost confidence in dollar debts owed by the US government. If the US government suddenly raised taxes by say, 10,000%, the dollar would plummet as well, as the world of investors would realize that there was no longer any motivation for people to work to make money, and therefore the ability of the government to raise money through taxation would go down the toilet. If unemployment were to skyrocket, or corporate profits collapse, or both, the US dollar would similarly lose value.

On the other hand, if the US government drastically cut back on waste and unproductive spending, the value of the dollar would rise, because investors worldwide would see that the US government was even more able to pay its debts. (Rising dollar value means lower interest rates paid on bonds issued by the government, which leads to a lesser need to raise taxes, which leads to a rising dollar.) In short it is your earning potential and that of your children that sets the value of the dollar. The value of the US dollar is for all intents and purposes, tax-based.

You won’t hear this analysis directly, only indirectly in the media. It’s a scary reality that the US government has complete control over the value of your savings, and the right to effectively steal from you (take value away without your permission). It’s also a pretty negative way of describing things, true as it is. Instead you will hear about factors that underlie or correlate with the ability of the government to raise taxes to pay its debts. As an example, “consumer confidence” is a predictor of how much junk we will buy this year, incurring sales taxes and leading to corporate profits, leading to more tax revenue. It may seem strange that this is more important than a rise in wages for the common worker. Why? Several reasons. Higher salaries may reduce corporate profits, and lower the government’s tax base. And, higher wages may not result in higher spending, it depends on how secure consumers feel, or whether they feel the need to save for retirement or a rainy day. It’s all about the taxes in reality.

Contrast this complex situation with the simplicity of an asset-backed currency, and you might wonder why anyone bothers with tax-based (a.k.a. fiat) currencies for commerce. The simple answer is that public fiat currencies allow the government a monstrous degree of control over its economy and ultimately its citizenry. If the government were to suddenly announce that everyone’s salary was to be cut by 50%, or that everyone had to give up half their savings to pay down the national debt, there would be a revolt (one would hope). Its far easier to simply “print more money” by raising taxes (but not too much), borrow more from the public markets against the earning power of future generations, etc. These are all things that ultimately reduce the value per unit of the money we all receive, but so far, no riots. But I digress….

Before putting you to sleep any further, let’s jump to the concept of private, asset-backed currencies. It should be clear at this point that a private currency backed by the US dollar is not much different than a US dollar. It might be more or less valuable than a US dollar in its purchasing power however. Consumers (should) love to use credit cards and value their credit lines more than money, because of the protection they get from fraud, and the flexibility to choose to be stupid and delay payment at exorbitant rates. Merchants should value a credit card less because of the chance of not getting paid by a fraudulent consumer, but more because of the increase in sales by accepting a consumer-preferred means of purchase. Because many traveler check companies will still honor counterfeit or fraudulently passed checks (in certain circumstances), it was common for many years to find that you could buy more foreign currency using these than by using cash! E-currencies based on the US dollar have similar considerations in determining their value – what are the costs, benefits, and risks involved in using these versus the alternatives? For the consumer and for the merchant?

For legitimate merchants, the primary differentiating concern is this: “When I get paid, what are the chances of a chargeback? What are the assurances that this currency is not counterfeit?”

For typically unsophisticated consumers, primary differentiating concerns are these: “How broadly is this currency accepted in case I need to use it for a different purpose? What are the extra features of this currency? Do I have some degree of protection from merchant fraud? Does it have reward points?”

Concerns common to both include: “What fees do I have to pay to complete a transfer? How much does it cost to exchange this currency for another that I need? What is the exchange rate for this currency going to be over time in the future?” And, since the currency is privately issued, “What is the chance that my currency will suddenly lose some or all of its value because of fraud on the part of the issuer?”

However, there is one much more significant and overriding concern that has emerged, thanks to whom else, the US government. It is: “what is the likelihood that this currency will suddenly become worthless because the US Government goes after the issuer?” This is not a new concern, of course. Even a gold-backed public currency could quickly become worthless if that country suddenly came under attack, or the government of that country was exposed as corrupt. This is the nightmare scenario for any currency, especially if the attacker is the US government.

So we know that e-currencies, even those backed by dollars are a currency with different characteristics than the dollar. Is the act of exchanging public currency for e-currency an investment? The answer is….not inherently, no. It depends on the intention of the one purchasing the e-currency. In many cases, purchase of an e-currency is performed for the sole purpose of enabling an exchange with a counter-party. In this case, the e-currency, regardless of its backing value, is an investment (ignoring whatever rewards result from the exchange). An e-currency by itself is generally NOT an investment if it is backed by the same currency that the holder would hold anyway. Moving your US dollars from a bank to an e-currency for no particular reason does not constitute an investment. However, if a holder of an e-currency doesn’t normally hold the dollar for other purposes, it can be a wise investment whose return is tied to the change in exchange rates. The same is true for currencies backed by gold (unless you already held the gold). E-currencies do not yield interest or dividends in and of themselves for many good reasons. It is possible however, to invest using e-currencies. I will cover that topic in a later installment.

I will draw this installment in the series to a close with the following summary. E-currencies are money, and as a medium of exchange of value, are always tied to a payment system of some kind. As privately issued currencies, they have different risks than public currencies, as well as different value-adds. Exchanging public currency for private currency is not inherently an investment, though the purpose of making the exchange may enable an investment. While many features of a private currency may add to or reduce the value of a currency, no other factor has more impact on the value of a private currency than the risk of it becoming suddenly valueless. The two primary potential causes for an e-currency losing its value are fraud by its issuer, or the issuer coming under attack, threatening the ability of holders of the currency to conduct commerce, perform exchanges, or access their funds. For this author, it is a sad statement that the two most likely attackers of a currency are the US government and cyber-terrorists who have an interest in reducing the value of an e-currency (e.g. competitor currencies, disgruntled individuals).

In the next article, I will cover why the current hostile US government posture with respect to e-currencies is both a) a very real concern, and b) perhaps the second biggest strategic blunder ever made by the US government. (Ok, well at least its in the top 10. ) I will then go on to conclude that this won’t change the future importance of e-currencies.

Stay Tuned!

Placement Rules and Design Ideas to Monogram a Bath Towel

Sharing your bath towel may not be a good idea since it increases your chances of acquiring any contagious disease which another person is suffering from. Monogrammed towels are ideal for personal use in big households, at such places there is an ample possibility that your towel gets mixed up with that of others. Moreover, it would be a good idea to gift a monogrammed bath towel to the newly wed couple.

To order your monogrammed bath towel you can contact a departmental store which provides this service or you can even order it online. If you are a skilled embroiderer you can monogram bath towels all by yourself. Following information regarding the design and positioning of a monogram on your towel would make your work a lot easier.

  • For a standard bath towel the height of the letters of the monogram should be large i.e., around 3″ to 4″. If your bath towel is without a side band then the monogram is usually placed 4″ above the hem. On the contrary, if your towel is banded it would be perfect to place the monogram 2″ above the band.
  • Monogram is usually applied 2″ above the hem on your hand towel if it is not banded and if your hand towel is banded place the monogram 1.5″ above the band. Alphabet size for this monogram should not be more than 2″ in height.
  • Use small alphabet size of around 1″ to 1.5″ in height while getting a wash cloth monogrammed. In the case of a banded wash cloth apply the monogram 1″ above the band and if the wash cloth does not bear a band place it 1.5 inch above the hem.
  • If you are planning to gift monogrammed bathing towel to a married couple who share the same last name, go for a three lettered monogram. This three lettered monogram can have the husband’s initial on the left, the wife’s initial on the right and first letter of the common last name in the middle. This is the conventional placement but if you want you can also swap the positioning of husband’s and wife’s initials, which is also all right.
  • If you want to gift monogrammed towel to a newly wed couple get them monogrammed as “His” and “Hers”.
  • People who don’t have a middle name generally opt for a two letter monogram bearing the initials with first initial on the left and second on the right. It is imperative to have both the letters of the same size.
  • Monogram for a person having a middle name with apostrophe usually consists of three letters; the height of the middle letter is kept a little more than the other two side letter. Or else you can also choose to place the middle letter on the right side.
  • Kid’s bathing towels are generally monogrammed with their first name or nick name.
  • It would be a good idea to get bath towels monogrammed with the word “Guest” for towels you want to keep exclusively for your guests.
Freelance Web Designer | Web Design | WordPress | Hong Kong